W801 Kai Wide Range Compound
W801 카이 와이드레인지 컴파운드
니하치 프로 · 니하치 · 니하치프로 · nihachi · W801 Kai Wide Range Compound 100ml · Nihachi Pro W801 Kai Wide Range Compound 100ml · 28pro W801 Kai Wide Range Compound 100ml · W801 Kai · W801改 · NNC-W801改 · W801改 ワイドレンジ研磨剤 · W801 ワイドレンジ研磨剤 改良版 · W801 카이 와이드레인지 컴파운드 100ml · 니하치 프로 W801 카이 와이드레인지 컴파운드 100ml · W801 개량형 컴파운드
An improved version of the W801 wide-range crush-type polishing compound, featuring an antistatic additive that suppresses heat from friction during polishing. It delivers sharper cutting clarity and a better gloss finish while remaining highly user-friendly.
W801 와이드레인지 컴파운드의 개량 모델로, 연마 중 마찰열을 억제하는 대전 방지제를 배합하여 뛰어난 연마 절삭성과 광택 마감을 구현합니다. 사용 편의성도 크게 향상되었습니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Polishes
Key features
- Improved formula of the original W801 with antistatic additive
- Suppresses frictional heat generation during polishing
- Sharp cutting action with excellent gloss finish result
- Wide polishing range: level 3 to 8 (medium to ultra-fine)
- Single compound; adjust cut by selecting buff type
- For dark-colored vehicles, finish with W808 special finisher
Usage
- Wash the vehicle thoroughly to remove surface dirt.
- Remove iron particles, water spots, and other bonded deposits.
- Mask off rubber trims, lights, and areas that must not be polished.
- Attach the appropriate buff to a dual-action or gear-action polisher. Apply 2–3 azuki-bean-sized drops to the buff and work a roughly 50 cm × 50 cm section until the paint surface becomes visible.
- Degrease with a degreasing shampoo to remove compound residue from panel gaps.
- Proceed to coating application if desired.
핵심 특징
- 대전 방지제를 배합한 W801 개량형
- 연마 중 마찰열 발생 억제
- 뛰어난 절삭성과 광택 마감
- 3~8 수준의 와이드 연마 레인지 (중간~극초미립자)
- 단일 컴파운드로 버프 종류만 교체하여 연마력 조절
- 진한 색상 차량은 W808 특수 마감제로 최종 마무리 권장
사용법
- 세차를 실시하여 차체의 오염을 충분히 제거합니다.
- 철분, 물자국 등 고착 오염물을 제거합니다.
- 고무, 라이트 등 컴파운드가 닿으면 안 되는 부위에 마스킹 테이프를 붙입니다.
- 더블 액션 또는 기어 액션 폴리셔에 적합한 버프를 장착하고, 버프에 컴파운드를 팥알 크기 2~3개 분량 묻혀 약 50cm×50cm 범위를 도장면이 보일 때까지 연마합니다.
- 탈지 샴푸로 패널 틈새 컴파운드 잔분을 세척합니다.
- 필요한 경우 코팅 작업으로 진행합니다.