Clean X-G
클린 X-G
니하치 · 니하치프로 · nihachi · Nihachi Pro Clean X-G · 28pro Clean X-G · 니하치 프로 클린 X-G · CleanXG · クリーンX-G · Clean XG Glass Coating · 불소 유리 발수 코팅 클린 X-G · 유리 발수 코팅 세트 클린 X-G · Clean X-G Fluorine Glass Set · NihachiPro Clean X-G
Clean X-G is a high-performance fluorine-based glass water-repellent coating system, well established in the professional car-wash industry. It includes an oil-film polishing prep step and a fluorine sealant application, delivering up to approximately one year of water-repellency per treatment. Durability is maintained by periodically reapplying the repellent layer every few months without repeating the polishing step.
클린 X-G는 세차 업계에서 널리 알려진 고성능 불소계 유리 발수 코팅 시스템입니다. 유막 연마 전처리부터 발수 코팅 시공까지 한 세트로 가능하며, 시공 후 약 1년간 발수 효과가 지속됩니다. 몇 달마다 발수제를 덧발라 주는 방식으로 초기 발수력을 유지할 수 있습니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Glass Sealant, Exterior : Glass Cleaner
Key features
- High-grade fluorine film provides long-lasting water repellency of approximately one year
- Includes oil-film polishing pre-treatment and dedicated glass cleaner
- Two-component system: fluorine liquid A and reaction liquid B
- Maintenance-friendly: reapply repellent layer only without repeating polishing
- Suitable for passenger vehicles, commercial vehicles, and trucks
Usage
- Wash the glass surface thoroughly and remove all contaminants.
- Apply the dedicated glass cleaner and polish to remove oil film.
- Ensure the glass surface is completely dry before applying the repellent.
- Apply the fluorine repellent using the dedicated sponge; keep all moisture away from the glass during application.
- Allow the coating to bond. For ongoing maintenance, reapply the repellent layer every few months without repeating the polishing step.
핵심 특징
- 고성능 불소 피막으로 약 1년간 발수 효과 지속
- 유막 연마 전처리 및 전용 유리 클리너 포함
- 불소액 A와 반응액 B의 2액형 시스템
- 유지 보수 시 발수제 덧바름만으로 발수력 회복 가능
- 승용차·상용차·트럭 등 다양한 차종에 적용 가능
사용법
- 유리면을 깨끗이 세차하여 이물질을 제거합니다.
- 전용 유리 클리너를 사용해 유막을 연마·제거합니다.
- 발수제 도포 전 유리면의 수분을 완전히 제거합니다.
- 전용 스펀지로 불소 발수제를 도포합니다. 시공 중 수분이 닿지 않도록 주의하세요.
- 코팅이 안정되면 완료. 이후 유지 보수 시에는 발수제만 덧발라 주면 됩니다.