Nihachi Pro PG1-R Kai Dilution Ratios & User Guide

Nihachi Pro PG1-R Kai dilution ratio and pH specification chart

PG1-R 카이

Nihachi Pro PG1-R Kai — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/nihachi-pro/pg1-r-kai

Nihachi Pro PG1-R 카이 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/nihachi-pro/pg1-r-kai

PG1-R Kai is an improved version of PG1-R, a simple cured glass-type coating that blends urethane resin to deliver the brand's signature deep, glossy finish with improved clarity and anti-fouling performance. It can be applied neat or diluted up to 1:100 for quick gloss top-up during routine washing.

PG1-R 카이는 PG1-R의 개량 버전으로, 우레탄 레진이 배합된 간이 경화계 코팅제입니다. 브랜드 고유의 깊고 진한 광택에 클리어함과 방오 성능이 향상되었으며, 원액 시공 또는 100배 희석으로 간편한 광택 보충에도 사용할 수 있습니다.

Brand
Nihachi Pro
Categories
Exterior : Coating
Primary dilution
RTU ~ 1:100
Last updated
2026-06-08

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU ~ 1:1001:0-100

Usage

  1. Wash the vehicle and remove water spots, iron particles, and other contaminants. Thorough surface prep maximizes performance.
  2. Optionally mask areas where the product should not be applied. Not recommended for window glass.
  3. Shake the bottle well. Apply to a damp, lightly wrung applicator cloth — start with 3 spray pumps (or ~5 drops with the cap applicator).
  4. Spread evenly over one panel, pressing with steady uniform pressure.
  5. Wring out the applicator cloth and wipe off excess, then finish with a dry cloth to eliminate streaks and moisture.
  6. Move to the next panel and repeat. Do a final check across the entire vehicle.
  7. For 1:100 maintenance dilution: add approx. 5 ml of PG1-R Kai to 500 ml of clean water, shake, then use as a wipe-on finish product after washing.

핵심 특징

  • 우레탄 레진 배합으로 깊고 진한 광택 구현
  • 기존 PG1-R 대비 클리어한 광택과 방오 성능 향상
  • 다양한 코팅 시스템의 최상층 코팅으로 활용 가능
  • 최대 100배 희석으로 간편한 유지 관리 광택 보충 가능
  • 피막 지속 3~6개월 이상, 초발수 물방울 효과
  • 습식·반습식·건식 시공 모두 가능

사용법

  1. 세차 후 물자국, 철분, 부착물을 완전히 제거합니다. 철저한 전처리가 성능 발휘에 중요합니다.
  2. 제품이 묻으면 안 되는 부위를 마스킹합니다. 유리창에는 권장하지 않습니다.
  3. 용기를 충분히 흔들고, 젖혀 꽉 짠 시공 클로스에 3회 스프레이(중전 타입은 약 5방울)를 도포해 시작합니다.
  4. 패널 한 면에 균일하게 펴 바릅니다.
  5. 클로스를 짜서 잉여분을 닦아낸 뒤, 건조 클로스로 얼룩과 수분을 완전히 마무리합니다.
  6. 다음 패널로 이동하여 동일하게 반복하고, 전체 최종 점검을 합니다.
  7. 100배 희석 유지 관리 시공: PG1-R 카이 약 5ml를 깨끗한 물 500ml에 넣고 흔든 뒤, 세차 후 마감 와이핑에 사용합니다.

Also known as: 니하치, 니하치프로, nihachi, 서일본케미컬, 서일본 케미컬, 서일본케미칼, Nihachi Pro PG1-R Kai, 28pro PG1-R Kai, PG1-R 改, PG1-R Revised, PG1R Kai, 니하치 프로 PG1-R 카이, 28프로 PG1-R 카이, PG1-R 개량형, PG1-R改 코팅, PG1R 改

한국어로 보기

Sources

Related products

More from Nihachi Pro

More Coating products

Explore more