No.20 F Silver
No.20 F 실버
니하치 · 니하치프로 · nihachi · Nihachi Pro No.20 F Silver · 28pro No.20 F Silver · 20系 F Silver · 20系"F"SILVER · NHP-SV20.1F · 니하치 프로 No.20 F 실버 · 28프로 No.20 F 실버 · 20계열 F 실버 · 20계 F 실버 코팅 · No.20 F SILVER
No.20 F Silver is a nano silver sacrificial-film restoration coating that employs high-definition coating technology to transform paint clarity from the inside out, achieving a deep, 4K/8K-quality gloss. The anti-static F-series formula improves soil resistance, water-repellency, and aerodynamic performance, and is applicable to the entire exterior — body, trim, glass, wheels, and tyres.
No.20 F 실버는 나노 실버 배합의 희생 피막 복원 코팅제로, 고화질화 코팅 기술로 도장 내부부터 광택 질을 변화시켜 4K·8K급 고화질 광택을 실현합니다. 대전 방지 F 시리즈 배합으로 방오성, 발수력, 주행 안정성을 향상시키며, 바디, 미도장 파츠, 유리, 휠, 타이어 등 차량 외장 전체에 적용 가능합니다.
- Brand
- Nihachi Pro
- Categories
- Exterior : Coating
Key features
- Nano silver sacrificial-film restoration coating with anti-static F formula
- High-definition coating technology for deep, luminous gloss
- Applicable to all exterior surfaces: body, trim, glass, wheels, and tyres
- Reduces water spots and enhances anti-fouling, chemical, and oil resistance
- Super water-repellent; film durability approx. 3 months
- Can be applied during post-wash drying for time-saving maintenance
- Anti-static effect promotes aerodynamic airflow improvement
Usage
- Wash the vehicle and wipe off moisture.
- Shake the bottle well. Apply the product to a clean damp, firmly wrung cloth.
- Spray approximately 5 pushes onto the cloth and spread over one panel at a time.
- Wipe with another clean damp, firmly wrung cloth to remove streaks evenly.
- Move to the next panel and repeat across the entire vehicle.
- Finish with a dry cloth wipe for an enhanced result. Ensure no streaks remain.
- For vehicles with no water-repellency, apply several times until the film stabilizes.
핵심 특징
- 대전 방지 F 배합 나노 실버 희생 피막 복원 코팅
- 고화질화 코팅 기술로 깊고 선명한 광택 실현
- 바디, 미도장 파츠, 유리, 휠, 타이어 등 외장 전체 적용 가능
- 물자국 저감 및 방오·내약품·내유성 향상
- 초발수, 피막 지속 약 3개월
- 세차 후 수분 닦기와 동시 시공으로 시간 단축 가능
- 대전 방지 효과로 주행 중 공기 흐름 개선 기대
사용법
- 세차 후 수분을 닦아냅니다.
- 용기를 충분히 흔들고, 깨끗하게 물에 적셔 꽉 짠 클로스에 제품을 도포합니다.
- 클로스에 약 5회 스프레이 후 패널 한 면씩 고르게 펴 바릅니다.
- 깨끗한 물에 적셔 꽉 짠 클로스로 얼룩이 남지 않도록 닦아냅니다.
- 다음 패널로 이동하여 동일하게 반복해 전체를 시공합니다.
- 마지막에 건조 클로스로 마무리하면 더욱 좋은 결과를 얻을 수 있습니다. 얼룩이 없는지 확인합니다.
- 발수 효과가 전혀 없는 차량은 수회 반복 시공하여 피막을 안정시킵니다.