Ganbass Pash Dilution Ratios & User Guide

패시
Ganbass Pash — Exterior : Coating. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ganbass/pash
Ganbass 패시 — Exterior : Coating. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ganbass/pash
Pash is a wet-application over-coating agent designed for users with advanced skills, offering the longest durability among wet-type coatings. It can be sprayed directly onto wet paint after washing or applied via a damp cloth, providing strong water-repellency and efficient water removal in a single step. It can be diluted up to five times with purified water for adjusted performance.
Pash는 숙련된 사용자를 위해 설계된 습식 시공 오버코팅제로, 습식 타입 코팅제 중 가장 높은 내구성을 자랑합니다. 세차 후 젖어 있는 도장 면에 직접 분사하거나 젖은 클로스에 묻혀 도포할 수 있으며, 강력한 발수 피막을 형성하고 물기 제거 효율도 높입니다. 정제수로 최대 5배 희석하여 사용할 수 있습니다.
- Brand
- Ganbass
- Categories
- Exterior : Coating
- Primary dilution
- RTU ~ 1:4
- Last updated
- 2026-06-20
Key features
- Highest durability among wet-application coating agents
- Strong water-shedding and repellency performance
- Applicable to paint, metal, and plastic lens surfaces
- Dilutable up to 5x with purified water
- Reduces water-wipe scratches during drying
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Coating (primary) | RTU ~ 1:4 | 1:0-4 |
Usage
- Dilute to the desired concentration with purified water, or start with undiluted product to find the best setting for your paint.
- After washing, with water droplets still remaining on the surface, spray the product directly onto the paint or apply it with a damp, wrung-out cloth in a washing motion.
- Without delay, wipe off excess product with a dry cloth.
- Check for any uneven patches, especially on dark or low-density paint, and ensure an even finish before completing.
핵심 특징
- 습식 시공 코팅제 중 최고 수준의 내구성
- 강력한 물 흘림 및 발수 성능
- 도장·금속·플라스틱 렌즈 면 모두 시공 가능
- 정제수로 최대 5배 희석 가능
- 건조 시 클로스 잔흠집 감소
사용법
- 정제수로 원하는 농도로 희석하거나, 먼저 원액으로 도장에 맞는 최적 농도를 찾아보십시오.
- 세차 후 물방울이 남아 있는 상태에서 도장 면에 직접 분사하거나, 젖혀 꽉 짠 클로스에 묻혀 세차하듯 도포하십시오.
- 간격을 두지 않고 마른 클로스로 즉시 잉여분을 닦아 내십시오.
- 특히 짙은 색이나 저밀도 도장에서는 얼룩이 생기지 않았는지 확인하고 마무리하십시오.
Also known as: 간바스, ganbas, Ganbass Pash, 간바스 패시
Sources
Related products
More from Ganbass
- Scratchless Sponge
- DETAILING APRON Standard
- 02F
- Hardened Coating Film Remover (Main Agent)
- QURERATZ
- RECOVERY
More Coating products
- Swissvax Bike Sheen Opaque
- Chemotion Spray Wax
- Soft99 Extra Hard Wax
- FX Protect Gloss Coating S-4H
- Fireball Cherry Blossom Wax
- KATIBA X FIREBALL Paste Wax