PG1-R 카이
PG1-R Kai
니하치 · 니하치프로 · nihachi · Nihachi Pro PG1-R Kai · 28pro PG1-R Kai · PG1-R 改 · PG1-R Revised · PG1R Kai · 니하치 프로 PG1-R 카이 · 28프로 PG1-R 카이 · PG1-R 개량형 · PG1-R改 코팅 · PG1R 改
PG1-R 카이는 PG1-R의 개량 버전으로, 우레탄 레진이 배합된 간이 경화계 코팅제입니다. 브랜드 고유의 깊고 진한 광택에 클리어함과 방오 성능이 향상되었으며, 원액 시공 또는 100배 희석으로 간편한 광택 보충에도 사용할 수 있습니다.
- 브랜드
- Nihachi Pro
- 카테고리
- Exterior : Coating
- 기본 희석 비율
- RTU ~ 1:100
핵심 특징
- 우레탄 레진 배합으로 깊고 진한 광택 구현
- 기존 PG1-R 대비 클리어한 광택과 방오 성능 향상
- 다양한 코팅 시스템의 최상층 코팅으로 활용 가능
- 최대 100배 희석으로 간편한 유지 관리 광택 보충 가능
- 피막 지속 3~6개월 이상, 초발수 물방울 효과
- 습식·반습식·건식 시공 모두 가능
희석 비율
- Exterior : Coating — RTU ~ 1:100 (1:0-100) (기본)
사용법
- 세차 후 물자국, 철분, 부착물을 완전히 제거합니다. 철저한 전처리가 성능 발휘에 중요합니다.
- 제품이 묻으면 안 되는 부위를 마스킹합니다. 유리창에는 권장하지 않습니다.
- 용기를 충분히 흔들고, 젖혀 꽉 짠 시공 클로스에 3회 스프레이(중전 타입은 약 5방울)를 도포해 시작합니다.
- 패널 한 면에 균일하게 펴 바릅니다.
- 클로스를 짜서 잉여분을 닦아낸 뒤, 건조 클로스로 얼룩과 수분을 완전히 마무리합니다.
- 다음 패널로 이동하여 동일하게 반복하고, 전체 최종 점검을 합니다.
- 100배 희석 유지 관리 시공: PG1-R 카이 약 5ml를 깨끗한 물 500ml에 넣고 흔든 뒤, 세차 후 마감 와이핑에 사용합니다.
PG1-R Kai is an improved version of PG1-R, a simple cured glass-type coating that blends urethane resin to deliver the brand's signature deep, glossy finish with improved clarity and anti-fouling performance. It can be applied neat or diluted up to 1:100 for quick gloss top-up during routine washing.
Key features
- Urethane resin blend delivers deep, glossy, jewel-like finish
- Improved clarity and anti-fouling performance over original PG1-R
- Compatible as a top coat over various coating systems
- Dilutable up to 1:100 for easy maintenance gloss replenishment
- Film durability 3–6+ months; super water-repellent bead behavior
- Suitable for wet, semi-wet, or dry application methods
Usage
- Wash the vehicle and remove water spots, iron particles, and other contaminants. Thorough surface prep maximizes performance.
- Optionally mask areas where the product should not be applied. Not recommended for window glass.
- Shake the bottle well. Apply to a damp, lightly wrung applicator cloth — start with 3 spray pumps (or ~5 drops with the cap applicator).
- Spread evenly over one panel, pressing with steady uniform pressure.
- Wring out the applicator cloth and wipe off excess, then finish with a dry cloth to eliminate streaks and moisture.
- Move to the next panel and repeat. Do a final check across the entire vehicle.
- For 1:100 maintenance dilution: add approx. 5 ml of PG1-R Kai to 500 ml of clean water, shake, then use as a wipe-on finish product after washing.