NANOSKIN NANO SHOCK Dilution Ratios & User Guide

NANOSKIN NANO SHOCK dilution ratio and pH specification chart

나노 쇼크

NANOSKIN NANO SHOCK — Exterior : Quick Detailer, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/nanoskin/nano-shock

NANOSKIN 나노 쇼크 — Exterior : Quick Detailer, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/nanoskin/nano-shock

NANO SHOCK is a SiO2-infused hydrophobic spray sealant built on a nano-particle micro-emulsion. Use it as a stand-alone spray-and-wipe sealant, or pair it with an AUTOSCRUB pad to combine surface decontamination and protection in one pass. The formula targets roughly 3 to 6 months of water beading along with UV protection, and leaves no residue on rubber, plastics or trim.

NANO SHOCK는 나노 입자 마이크로에멀전 기반의 SiO2 함유 발수 스프레이 실런트입니다. 단독으로 스프레이 후 닦아내는 방식으로 사용하거나, AUTOSCRUB 패드와 함께 써 오염 제거와 보호를 한 번에 진행할 수 있습니다. 약 3~6개월 발수와 자외선 차단을 목표로 하며, 고무·플라스틱·몰딩 위에 잔여물을 남기지 않습니다.

Brand
NANOSKIN
Categories
Exterior : Quick Detailer
Primary dilution
RTU
pH
neutral (6)
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Quick Detailer (primary)RTU1:0

Usage

  1. Wash the vehicle thoroughly to remove dust, sand and dirt.
  2. Mist NANO SHOCK evenly over one section at a time.
  3. Work the product into the surface with an AUTOSCRUB pad, mitt, towel or sponge using light pressure.
  4. Wipe off any residue with a clean, dry microfiber towel.

핵심 특징

  • SiO2 나노 입자 마이크로에멀전 발수 배합
  • 약 3~6개월 내구성 목표
  • AUTOSCRUB과 함께 1단계 윤활·실런트 겸용
  • UV 흡수제로 색상 변색 억제
  • 고무·몰딩·플라스틱에 잔여물 없음
  • 도장·유리·크롬·휠·몰딩에 사용 가능
  • 스프레이 후 닦아내는 단순 시공

사용법

  1. 먼지·모래·오염물이 남지 않도록 차량을 깨끗이 세차합니다.
  2. 한 섹션씩 NANO SHOCK를 표면에 고르게 분사합니다.
  3. AUTOSCRUB 패드, 미트, 타월 또는 스펀지로 가볍게 눌러 표면에 골고루 펴 줍니다.
  4. 깨끗하고 건조한 마이크로파이버 타월로 잔여물을 닦아냅니다.

Also known as: 나노스킨, NANOSKIN NANO SHOCK, NS NANO SHOCK, 나노스킨 나노 쇼크

한국어로 보기

Sources

Related products

More from NANOSKIN

More Quick Detailer products

Explore more