Mile Deep SHEEN | Instant Gloss Coating & Drying Aid Dilution Ratios & User Guide

Mile Deep SHEEN | Instant Gloss Coating & Drying Aid dilution ratio and pH specification chart

쉰 | 인스턴트 글로스 코팅 & 드라잉 에이드

Mile Deep SHEEN | Instant Gloss Coating & Drying Aid — Exterior : Quick Detailer, neutral pH, base dilution 1:10~1:50. At 1:10, mix about 100 ml of Mile Deep SHEEN | Instant Gloss Coating & Drying Aid per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/mile-deep/sheen-instant-gloss-coating-and-drying-aid

Mile Deep 쉰 | 인스턴트 글로스 코팅 & 드라잉 에이드 — Exterior : Quick Detailer, pH neutral, 기본 희석 1:10~1:50. 1:10 기준 물 1L당 Mile Deep 쉰 | 인스턴트 글로스 코팅 & 드라잉 에이드 약 100ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/mile-deep/sheen-instant-gloss-coating-and-drying-aid

A drying aid and gloss topper applied after the contact wash via foam lance, pump sprayer or spray bottle. Once rinsed, water sheets off the surface, leaving a glossier look and instant hydrophobic protection while cutting drying time and reducing paint contact.

컨택트 워시 이후 폼 랜스, 펌프 스프레이어 또는 스프레이 보틀로 도포하는 드라잉 에이드 겸 광택 토퍼입니다. 헹궈내면 물이 시트처럼 빠지면서 광택과 즉석 발수층이 더해지고, 건조 시간과 도장 접촉이 함께 줄어듭니다.

Brand
Mile Deep
Categories
Exterior : Quick Detailer, Exterior : Coating, Exterior : Drying Aid
Primary dilution
1:10~1:50
pH
neutral (6)
Last updated
2026-05-17

Key features

  • Adds gloss and hydrophobic protection in one step
  • Sheeting effect speeds drying and reduces contact
  • Works as a topper over existing LSPs
  • Applies via foam lance, pump sprayer or spray bottle
  • Helps reduce swirl risk during drying

Dilution

UseDilutionRatio
Exterior : Drying Aid (primary)1:10~1:501:10-50
Exterior : Quick Detailer1:10~1:501:10-50
Exterior : Coating1:10~1:501:10-50

Usage

  1. Make sure surfaces are clean from the contact wash.
  2. Shake well and dilute with clean water at 1:10 for heavy, 1:20 for medium or 1:50 for light protection.
  3. Apply through a foam lance with pressure washer, pump sprayer or spray bottle.
  4. Rinse off and dry thoroughly with a quality microfibre drying towel such as Mile Deep ABSORB+.

핵심 특징

  • 광택과 발수 보호를 한 번에 추가
  • 시팅 효과로 건조 시간 단축과 접촉 감소
  • 기존 LSP 위에 토퍼로 활용 가능
  • 폼 랜스·펌프 스프레이어·스프레이 보틀 모두 사용
  • 건조 단계의 스월 발생 위험 감소

사용법

  1. 컨택트 워시로 표면이 깨끗한 상태인지 확인합니다.
  2. 잘 흔들어 깨끗한 물에 희석합니다. 강한 보호는 1:10, 보통은 1:20, 가벼운 보호는 1:50으로 맞춥니다.
  3. 압력 세척기의 폼 랜스, 펌프 스프레이어 또는 스프레이 보틀로 도포합니다.
  4. 헹군 뒤 마일딥 ABSORB+ 같은 마이크로화이버 드라잉 타올로 충분히 건조합니다.

Also known as: 마일딥, SHEEN, Mile Deep SHEEN, MD SHEEN, Drying Aid, 쉰, 마일딥 쉰, 드라잉 에이드, 마일딥 드라잉 에이드, 세라믹 드라잉 에이드, 엠디 쉰

한국어로 보기

Sources

  • Mile Deep official product page

Related products

More from Mile Deep

  • ENACT | Multi-Purpose Microfibre Cloths (Pack of 10)
  • REFRESH | Anti-Bacterial Interior Sanitiser
  • ENACT+ | Ultra-Soft Edgeless Microfibre Cloths (Pack of 10)
  • APPLY | Specialist Microfibre Applicator
  • ABSORB+ | Microfibre Drying Towel
  • SNOW | Concentrated pH-Neutral Snow Foam

More Quick Detailer products

  • Meguiar's MVP Detailer
  • Griot's Garage Speed Shine®
  • Shiny Garage ICY Ceramic Detailer Whiskey Edition
  • EZ Car Care Chromance
  • Jax Wax Boat Wipe
  • POLYTOP Velox Care

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)