Marine Protective Sealant
마린 프로텍티브 실런트
Spray-on sealant aimed at gelcoat and marine paintwork to leave a high-gloss finish across an entire boat or watercraft. Designed for straightforward, panel-by-panel application after the surface has been pre-cleaned and degreased.
젤코트와 마린 페인트 표면에 고광택 마감을 남기는 분무형 실런트로, 보트와 수상 차량 전체에 두루 사용할 수 있습니다. 사전 세척과 탈지를 마친 표면 위에서 구역 단위로 간단히 작업하도록 짜인 처방입니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Quick Detailer
Key features
- Spray sealant for boats and watercraft
- Hi-gloss on gelcoat and marine paint
- Section-by-section workflow
Usage
- Pre-clean the surface with the matching Hull PreCleaner.
- If the gelcoat or paint looks chalked, polish first with the appropriate gelcoat polish.
- Wipe the surface down with Panel Preparation Spray to remove residual oils.
- Mist four to five sprays onto a Polish & Sealing Towel and lay it across the panel in cross strokes, working in roughly 1x1 m sections.
- Buff off with a clean microfibre and never let the product dry on the surface.
- Hold off on chemical washes the same day, then keep upkeep gentle with a neutral shampoo to extend the seal.
핵심 특징
- 보트·수상 차량용 분무 실런트
- 젤코트·마린 페인트에 고광택
- 구역 단위 시공 흐름
사용법
- 전용 Hull PreCleaner로 표면을 먼저 사전 세척합니다.
- 젤코트나 페인트가 백화되어 있다면 적절한 젤코트 폴리시로 먼저 정리합니다.
- Panel Preparation Spray로 면을 닦아 잔류 유분을 제거합니다.
- Polish & Sealing 타월에 4~5회 분사한 뒤 약 1x1m 구역 단위로 교차 방향으로 펴 바릅니다.
- 깨끗한 마이크로파이버로 닦아 내며, 제품이 표면에서 마르도록 두지 않습니다.
- 시공 당일 화학 세정제 사용은 피하고, 이후 일상 관리는 중성 샴푸로 진행해 실링 유지력을 늘립니다.