Waterless Wash & Shine
워터리스 워시 & 샤인
NANOSKIN Waterless Wash & Shine is a smart surfactant-based spray cleaner that lifts and removes dirt, grime, and contaminants from paint, glass, chrome, plastic, and metal surfaces without the need for water. The formula enhances surface gloss and leaves a streak-free, protective finish that repels dirt and extends surface cleanliness.
나노스킨 워터리스 워시 & 샤인은 스마트 계면활성제 기반 스프레이 클리너로, 물 없이도 도장면, 유리, 크롬, 플라스틱, 금속 표면의 먼지와 오염물질을 제거합니다. 광택을 향상시키고 얼룩 없는 보호 마감을 남겨 오염 재흡착을 방지하며 표면 청결도를 오래 유지합니다.
- Brand
- NANOSKIN
- Categories
- Exterior : Rinseless&Waterless, Exterior : Quick Detailer
Key features
- Waterless cleaning without rinse water required
- Smart surfactant formula lifts and removes dirt and grime
- Enhances gloss with a streak-free finish
- Compatible with paint, glass, chrome, plastic, metal, and more
- Creates a protective layer that repels dirt
- Ideal for quick touch-ups and areas with limited water access
Usage
- Shake the bottle well before use to ensure proper mixing of ingredients.
- Ensure the surface is cool to the touch and out of direct sunlight.
- Spray a generous amount onto the surface, working one small section at a time.
- Allow the solution to dwell briefly so the surfactant chemistry can penetrate and lift dirt.
- Wipe in a back-and-forth motion with a clean, soft microfiber towel using light pressure, starting from the top and working down.
- For heavily soiled areas, use multiple towels or flip to a clean side to avoid spreading dirt.
- Continue working across the entire surface, periodically folding or switching to a clean section of the towel.
- Use a separate dry microfiber towel to buff the surface to a streak-free shine.
- Repeat for other areas as needed, wiping away promptly to avoid the product drying on the surface.
핵심 특징
- 물 없이 세정 가능한 무세척 방식
- 스마트 계면활성제 포뮬라가 오염물질을 부상시켜 제거
- 얼룩 없는 광택 향상 마감
- 도장면, 유리, 크롬, 플라스틱, 금속 등 다양한 표면 호환
- 오염 재흡착을 방지하는 보호층 형성
- 간단한 터치업 및 물 사용이 제한된 환경에 적합
사용법
- 사용 전 용기를 잘 흔들어 성분을 고르게 혼합합니다.
- 표면이 식어 있고 직사광선을 피하는 상태인지 확인합니다.
- 한 번에 작은 구역씩 작업하며 표면에 충분히 분사합니다.
- 계면활성제가 오염물질에 침투하여 분리될 수 있도록 잠시 그대로 둡니다.
- 깨끗하고 부드러운 마이크로파이버 타올로 위에서 아래 방향으로 가볍게 앞뒤로 닦아냅니다.
- 오염이 심한 부위는 여러 장의 타올을 사용하거나 깨끗한 면으로 바꿔가며 오염 확산을 방지합니다.
- 전체 표면을 닦을 때까지 타올을 접거나 깨끗한 부분으로 계속 교체하며 작업합니다.
- 별도의 건조 마이크로파이버 타올로 광택을 내어 얼룩 없는 마감을 완성합니다.
- 필요한 다른 부위도 반복 작업하되, 표면에서 건조되지 않도록 신속히 닦아냅니다.