Black & Wrap Shampoo
블랙 & 랩 샴푸
A 2-in-1 car shampoo built for dark, matte and PPF or vinyl-wrapped vehicles, washing and protecting in a single step. Mineral sequestrants help prevent waterspots during drying and lift the gray patina from matte paint, while high lubrication and dilution up to 1:300 keep washes safe on nano coatings and gentle on paint and films.
다크, 매트, PPF 또는 비닐 랩핑 차량을 한 번의 세차로 세정하고 보호하도록 설계된 2-in-1 카 샴푸입니다. 미네랄 시퀀트런트가 건조 중 워터스팟이 생기는 것을 줄이고 매트 도장에 끼는 회색 막을 풀어 주며, 최대 1:300의 희석비와 풍부한 윤활성 덕분에 나노 코팅에도 안전하고 도장과 보호 필름을 부드럽게 케어합니다.
- Brand
- MAFRA MANIAC LINE
- Categories
- Exterior : Bucket Car Shampoo, Exterior : PPF Maintenance
- Primary dilution
- 1:300
- pH
- acid
Key features
- 2-in-1 wash plus protection with shine and stain resistance
- Reduces limescale microfilm with each wash
- Tuned for black, matte and PPF-wrapped vehicles
- High lubrication helps prevent swirls and micro-scratches
- Lifts gray patina from black and matte paint
- Mineral sequestrants limit waterspot formation
- Economical with dilution up to 1:300
- Gentle deep cleaning of stubborn dirt
- Revives paint and PPF film
- Safe on nano coatings
Dilution
- Exterior : Bucket Car Shampoo — 1:300 (1:300) (primary)
Usage
- Prewash with Foam Gun Prewash to clear coarse dirt first.
- Mix 4 capfuls of shampoo into 8 L of water in a bucket for roughly a 1:300 solution.
- Wash in the shade on a cool wet vehicle from top to bottom panel by panel, using a microfibre glove and a clean rinse bucket.
- Rinse the glove between panels in the second bucket to release trapped grit.
- On heavily soiled spots, add a few drops of product onto the wet glove for targeted cleaning.
- Rinse high-pressure top to bottom, mist Exterior Quick Detailer onto the wet surface and dry with a Super Dryer cloth.
핵심 특징
- 2-in-1: 세정과 보호를 동시에, 광택과 얼룩 방지
- 세차할수록 줄어드는 석회 마이크로필름
- 블랙·매트·PPF 랩핑 차량을 위한 설계
- 높은 윤활성으로 스월·미세 스크래치 위험 감소
- 블랙과 매트 도장의 회색 막 제거
- 미네랄 시퀀트런트로 워터스팟 발생 억제
- 최대 1:300 희석으로 경제적 사용
- 오래된 오염도 부드럽고 깊이 있게 세정
- 도장과 PPF 필름의 활력 회복
- 나노 코팅에도 안전
사용법
- 먼저 Foam Gun Prewash로 차체의 굵은 오염을 걷어냅니다.
- 양동이에 물 8L를 받고 제품을 4캡 풀어 약 1:300 농도로 맞춥니다.
- 그늘에서 차체가 차갑고 젖은 상태로, 위에서 아래로 패널 단위 세차하며 극세사 장갑과 별도의 린스 버킷을 함께 사용합니다.
- 패널을 옮길 때마다 린스 버킷에 장갑을 헹궈 굵은 입자를 떨어냅니다.
- 오염이 심한 부위에는 젖은 장갑에 제품 몇 방울을 떨어뜨려 부분 세정합니다.
- 위에서 아래로 고압 린싱 후 젖은 표면에 Exterior Quick Detailer를 분사하고 Super Dryer로 마무리합니다.