Iron Remover
아이언 리무버
A concentrated 2-in-1 cleaner and decontaminant that lifts ferrous particles such as brake dust, rail or tram iron and industrial fallout from rims, bodywork and glass. The acid-free, pH-balanced formula uses a color-changing indicator that turns purple as iron dissolves and stays safe on steel, aluminium, light-alloy, chromed and polished rims.
휠과 차체, 유리에서 브레이크 더스트, 철도 또는 트램에서 날아온 금속 분진, 산업 분진 같은 철 오염을 풀어내는 농축 2-in-1 클리너 겸 제철제입니다. 산을 쓰지 않은 pH 균형 포뮬러에 철과 반응하면 보라색으로 변하는 컬러 인디케이터가 함께 들어 있어, 스틸과 알루미늄, 경합금, 크롬, 광택 휠에 안전하게 적용할 수 있습니다.
- Brand
- MAFRA MANIAC LINE
- Categories
- Exterior : Remover, Exterior : Tire&Wheel Cleaner
- Primary dilution
- 1:1
- pH
- neutral
Key features
- Strong decontamination on rims, bodywork and glass
- Concentrated and ready-to-use, max dilution 1:1
- 2-in-1 cleaning and iron decontamination
- Acid-free, pH-balanced formula
- Removes rough iron contamination from paint
- Safe on steel, light-alloy, chromed and polished rims
- Helps restore original shine after decontamination
Dilution
- Exterior : Remover — 1:1 (1:1) (primary)
- Exterior : Tire&Wheel Cleaner — 1:1 (1:1)
Usage
- Work in the shade on a cool surface.
- For routine rim care every few washes, dilute 1:1, or apply neat for deeper decontamination and dwell about 3 to 4 minutes without drying.
- Use a soft-bristle brush for spoke gaps; the liquid turns purple as it reacts with iron.
- Rinse thoroughly with water and dry with a microfibre cloth.
- For bodywork, after washing and drying spray neat from about 40 cm, dwell roughly 3 to 5 minutes, then rinse thoroughly.
- Avoid unpainted metals, brake calipers, motorcycles and hot surfaces, and never dilute beyond 1:1.
핵심 특징
- 휠, 차체, 유리의 철분 오염 강력 제거
- 농축이지만 즉시 사용 가능, 최대 희석 1:1
- 2-in-1: 세정과 제철 동시 진행
- 산을 쓰지 않은 pH 균형 포뮬러
- 도장면의 거친 철분 오염 정리
- 스틸, 경합금, 크롬, 광택 휠에 안전
- 디컨타미네이션 후 본연의 광택 회복에 도움
사용법
- 그늘에서 표면이 차가운 상태로 작업합니다.
- 휠은 정기 관리 시 1:1로 희석하고, 강한 오염은 원액 그대로 분사한 뒤 약 3~4분 두되 마르지 않게 합니다.
- 스포크 사이는 부드러운 솔로 풀어 주며, 철과 반응하면 액체가 보라색으로 변하는 것을 확인합니다.
- 맑은 물로 충분히 헹군 뒤 극세사 타월로 닦아 건조합니다.
- 차체에는 세차와 건조를 마친 뒤 약 40cm 거리에서 원액을 균일하게 분사하고 3~5분 작용시킨 다음 충분히 헹굽니다.
- 도장되지 않은 금속, 브레이크 캘리퍼, 모터사이클, 뜨거운 표면에는 사용하지 말고, 1:1보다 더 묽게 희석하지 않습니다.