Foam Gun Prewash
폼 건 프리워시
A foaming prewash that loosens smog, road dirt, bug and bird residues and plant matter from exterior surfaces while staying gentle on existing protection. Highly dilutable up to about 1:100 and safe on nano or ceramic coatings, it lifts a large share of coarse dirt before contact washing to reduce swirls and micro-scratches.
스모그, 도로 오염, 벌레와 새 분변 잔여물, 식물성 때를 외부 표면에서 풀어내면서도 기존 보호 코팅에는 부담을 주지 않는 거품형 프리워시입니다. 약 1:100까지 희석할 수 있고 나노 또는 세라믹 코팅에도 안전하며, 수작업 세차 전에 굵은 오염을 상당 부분 걷어내 스월과 미세 스크래치 위험을 줄여 줍니다.
- Brand
- MAFRA MANIAC LINE
- Categories
- Exterior : Pre-washing (Pretreatment), Exterior : Foam
- Primary dilution
- 1:50~1:100
- pH
- alkali
Key features
- Cleans, polishes and protects exterior surfaces
- Safe foaming prewash with dry, compact foam
- Lifts smog, road dirt, bug and bird residues and plant matter
- High dilution ratios deliver good economy
- Respects previously applied nano or coating protection
- Works with pump sprayer or foam lance
- Lifts the bulk of dirt before contact washing
- Recommended with foam gun or low-pressure pump sprayer
- Pleasantly scented
Dilution
- Exterior : Pre-washing (Pretreatment) — 1:50~1:100 (1:50-100) (primary)
- Exterior : Foam — 1:5~1:10 (1:5-10)
Usage
- Work in the shade on a cool surface, and in summer rinse the vehicle first to remove coarse dirt.
- For localized heavy dirt on lower panels, apply diluted 1:10 with a manual sprayer.
- With a low-pressure pump sprayer, dilute 1:50 in winter or 1:100 in summer.
- In foam gun mode, dilute 1:5 in winter or 1:10 in summer so the final exit dilution is roughly 1:50 to 1:110.
- Apply a thick foam layer from bottom to top and let it dwell up to about 5 minutes.
- Rinse high-pressure from bottom to top and never let the product dry on the surface.
핵심 특징
- 외부 전 표면 세정·광택·보호
- 건조하고 치밀한 거품의 안전한 프리워시
- 스모그, 도로 오염, 벌레와 새 분변, 식물성 잔여물 제거
- 고희석비로 경제적 사용
- 기존 나노 또는 코팅 보호제와 호환
- 펌프 스프레이어와 폼 랜스 모두 사용 가능
- 수작업 세차 전 굵은 오염을 대부분 제거
- 폼 건이나 저압 수동 펌프 스프레이어 사용 권장
- 은은한 향
사용법
- 그늘에서 표면이 차가운 상태로 작업하고, 여름철에는 먼저 헹궈 굵은 오염을 걷어냅니다.
- 하단부 국소 오염에는 수동 스프레이어로 1:10 희석해 직접 분사합니다.
- 저압 수동 펌프 스프레이어를 쓸 때는 겨울 1:50, 여름 1:100으로 희석합니다.
- 폼 건 모드에서는 겨울 1:5, 여름 1:10으로 희석해 최종 분사 농도가 대략 1:50~1:110이 되게 합니다.
- 두꺼운 거품층을 아래에서 위로 도포하고 최대 약 5분 정도 작용시킵니다.
- 고압수로 아래에서 위 방향으로 헹구며 제품이 표면에서 마르지 않게 합니다.