Dr. Beasley's Ceramic Body Wash Dilution Ratios & User Guide
세라믹 바디 워시
Dr. Beasley's Ceramic Body Wash — Exterior : Bucket Car Shampoo, neutral pH, base dilution 1:333. At 1:333, mix about 3 ml of Dr. Beasley's Ceramic Body Wash per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/dr-beasley-s/ceramic-body-wash
Dr. Beasley's 세라믹 바디 워시 — Exterior : Bucket Car Shampoo, pH neutral, 기본 희석 1:333. 1:333 기준 물 1L당 Dr. Beasley's 세라믹 바디 워시 약 3ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/dr-beasley-s/ceramic-body-wash
Highly concentrated, pH-friendly car wash soap for ceramic-coated vehicles. Active surfactants lift contaminants with minimal agitation, protecting SiO2/TiO2 coatings from wash-induced wear. Just 1 oz per bucket means a 12 oz bottle lasts about six months of bi-weekly washes while boosting gloss and reflectivity.
세라믹 코팅 차량용 초고농축 세차 샴푸. 활성 계면활성제가 강한 마찰 없이 오염물을 부상시켜 SiO2·TiO2 코팅의 세차 마모를 막습니다. 버킷당 1온스만 사용해 12온스 한 병으로 약 6개월 격주 세차가 가능하며 광택과 반사율을 높입니다.
- Brand
- Dr. Beasley's
- Categories
- Exterior : Bucket Car Shampoo
- Primary dilution
- 1:333
- pH
- neutral (8)
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-07-10
How it works
- Cleaning surfactant — Lifts soil off the surface and disperses it in water.
- Humectant — Holds moisture to slow drying and cracking.
- nonionic/anionic/amphoteric surfactants — Ionic types of the surfactants used in this product.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Sulfonic acids, C14-16-alkane hydroxy and C14-16-alkene, sodium salts | 68439-57-6 | Anionic surfactant |
| Amides, coco, N-(2-hydroxypropyl) | 68333-82-4 | Nonionic surfactant |
| Cocoamidopropyl hydroxysultaine | 68139-30-0 | Amphoteric surfactant |
| Glycerin | 56-81-5 | Humectant |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Active surfactants lift contaminants with minimal agitation
- Ultra-concentrated: 1 oz per bucket
- Protects ceramic coating from wash-induced wear
- Enhances gloss and reflectivity
- Compatible with SiO2 and TiO2 coatings
- Works with foam guns and foam cannons
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Bucket Car Shampoo (primary) | 1:333 | 1:333 |
Usage
- Place wash pads on a Grit Guard at the bottom of a clean wash bucket, then add 1 oz (2 capfuls) of Ceramic Body Wash on top of the pads.
- Fill the bucket with 3–4 gallons of water and stir to distribute the soap evenly before washing.
- Wash the vehicle panel by panel using the two-bucket method, rinsing the wash pad in a separate rinse bucket between panels.
- For foam cannon use, add 2 oz of Ceramic Body Wash to the foam cannon reservoir, fill with water, and stir before attaching to the pressure washer.
핵심 특징
- 활성 계면활성제로 최소한의 마찰로 오염물 제거
- 초고농축: 버킷당 1온스
- 세차로 인한 세라믹 코팅 마모 방지
- 광택 및 반사율 향상
- SiO2 및 TiO2 코팅 호환
- 폼 건 및 폼 캐논 사용 가능
사용법
- 세차 버킷 바닥의 그릿 가드 위에 워시 패드를 올려놓은 후, 패드 위에 세라믹 바디 워시 1온스(2캡풀)를 붓습니다.
- 버킷에 물 3~4갤런을 채우고 세차 전 비누가 고르게 섞이도록 저어줍니다.
- 패널별로 투 버킷 방식을 사용하여 세차하며, 패널 사이마다 워시 패드를 별도의 린스 버킷에 헹굽니다.
- 폼 캐논 사용 시, 폼 캐논 저장고에 세라믹 바디 워시 2온스를 넣고 물을 채운 후 저어서 고압 세척기에 연결합니다.
Also known as: 닥터 비슬리, 비슬리, Beasley, dr Beasley, Beasley's, Dr. Beasley's Ceramic Body Wash, CBW, Dr. Beasley's CBW, 닥터 비즐리 세라믹 바디 워시, 닥터 비즐리 CBW
Sources
- Dr. Beasley's official product page
- Safety Data Sheet (SDS / MSDS)
- Last reviewed: 2026-07-10
Related products
More from Dr. Beasley's
- NSP CoreCut+
- Fresh Start Garage
- Buff and Shine EdgeGuard Yellow Polishing Foam Pad
- Wheel Brush
- All Surface Detailing Brush
- Tire Scrub Brush
More Bucket Car Shampoo products
- Lunatic Polish Sweet Bubble Car Shampoo
- Car Gods Pure Shampoo
- Ganbass REBOOT SHAMPOO
- Lunatic Polish CherryFit Car Shampoo
- Carbon Collective LABS Decon Shampoo
- Koch Chemie Ceramic Effect Shampoo