STC + HPC PRO - 세라믹 코팅
STC + HPC PRO - Ceramic Coating
라보 · Labo · 라보코스메티카 · STC + HPC PRO · STC HPC PRO · Labo STC HPC PRO · Labocosmetica STC + HPC PRO · STC HPC 프로 · 라보코스메티카 STC HPC PRO
STC와 HPC PRO 조합은 STC를 베이스 실런트로 (약 70 퍼센트 물리적·30 퍼센트 화학적 작용) 두고 HPC PRO를 나노 하이드로 젤 시스템 기반의 오버코트로 적층하는 세라믹 보호 시스템입니다. STC는 스크래치, UV, 오염물에 대해 오래 지속되는 보호를 제공하고, HPC PRO는 그 위에 유연하면서 발수성·정전기 방지 특성을 가진 폴리머 막을 형성해 광택을 강화하고 표면을 더 오래 깨끗하게 유지시켜 줍니다.
- 브랜드
- Labocosmetica
- 카테고리
- Exterior : Coating
핵심 특징
- 스크래치, 도로 염분, 타르, 산성비, 오염, UV에 저항
- 발수성: 세차와 유지 관리 용이
- 3차원 광택과 깊이감
- HPC가 화학물질·염분·UV 손상 저항 강화
- HPC가 물·오염·이물질 차단
- HPC 정전기 방지 작용으로 먼지 부착 감소
- HPC가 색상 깊이와 광택 강화
- HPC는 단독 또는 다른 라보코스메티카 코팅 위 탑코트로 사용
사용법
- 탈오염하고 필요 시 폴리싱, VERITAS로 탈지한 뒤 약 25도씨 이하·직사광선이 없는 환경에서 작업합니다.
- 먼저 STC를 베이스로 크로스 해칭 방식으로 도포하고, 플래시 후 깨끗한 마이크로파이버로 레벨링합니다.
- 권장 대기 시간 후 HPC PRO를 오버코트로 크로스 해칭 방식 도포하고 플래시 후 레벨링·버핑합니다.
- 약 12시간 이상 물을 피하고 완전 경화는 약 24시간이며, STC + HPC PRO 시스템은 광택·탄성·셀프 클리닝 효과를 강화해 줍니다.
STC combined with HPC PRO is a layered ceramic protection system pairing STC as the base sealant (with about 70 percent physical and 30 percent chemical action) and HPC PRO as a nano hydro-gel overcoat. STC delivers durable defense against scratches, UV, and contaminants, while HPC PRO adds a flexible, hydrophobic, antistatic polymer film that boosts gloss and helps panels stay cleaner longer.
Key features
- Resists scratches, road salt, tar, acid rain, pollution, and UV
- Hydrophobic, easier washing and upkeep
- Three-dimensional gloss and depth
- HPC adds resistance to chemicals, salt, and UV damage
- HPC repels water, dirt, and contaminants
- HPC antistatic action reduces dust pickup
- HPC amplifies color depth and gloss
- HPC works alone or as a topcoat over other Labocosmetica coatings
Usage
- Prep the paint by decontaminating, polishing if needed, and degreasing with VERITAS, working below about 25 degrees C and out of direct sunlight.
- Apply STC first as the foundation in a criss-cross pattern, wait for flash, then level with a clean microfiber.
- After the recommended cure or wait time, apply HPC PRO as the overcoat in a criss-cross pattern, let it flash, then level and buff.
- Keep water off for at least about 12 hours and allow about 24 hours for full cure; the layered STC and HPC PRO system delivers extended gloss, elasticity, and self-cleaning behavior.