Gelcoat Ultra Heavy Cut
젤코트 울트라 헤비 컷
Aggressive machine compound created for restoring badly oxidised gelcoats and weathered boat paint. The silicone-oil-free formula generates little dust or sling, making it suitable as a starting cut for severely chalked marine surfaces.
산화가 심하게 진행된 젤코트와 풍화된 보트 도장 복원을 목적으로 한 강력한 머신 컴파운드입니다. 실리콘 오일이 들어가지 않고 분진과 튐이 적어, 백화가 심한 마린 표면의 초기 절삭 단계에 활용됩니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Polishes
Key features
- Aggressive cutting power
- Silicone-oil-free chemistry
- Low dust and sling profile
- Targeted at oxidised gelcoats
Usage
- Place about five pea-sized drops onto a Heavy Cut Pad, short Lambswool Pad, or Twisted Wool Pad.
- Spread the compound across the panel at low speed before fully engaging the machine.
- Work crosswise on a rotary capped at 1000 rpm or an eccentric set to its highest setting until the surface is leveled.
- Wipe residue with a Polish and Sealing Towel; on dark gelcoat, refine remaining marks with Gelcoat Micro Cut.
- Finish by sealing with Gelcoat Finish, Marine Protective Sealant, or Ceramic Boat Hull to close the open pores.
핵심 특징
- 강한 절삭력
- 실리콘 오일 미함유
- 분진·튐이 적은 작업감
- 산화 젤코트 복원에 초점
사용법
- 헤비 컷 패드, 짧은 램스울 패드, 또는 트위스티드 울 패드에 콩알 크기 다섯 방울 정도를 짭니다.
- 본격 작업 전에 낮은 회전수로 컴파운드를 패널 전체에 펴 발라 둡니다.
- 로터리는 1000 rpm 이내, 이센트릭은 최고 단계로 십자 방향 작업해 표면을 평탄화합니다.
- 폴리시 앤 실링 타올로 잔여물을 닦고, 짙은 색 젤코트에서는 젤코트 마이크로 컷으로 자국을 다듬습니다.
- 마무리로 젤코트 피니시, 마린 프로텍티브 실런트 또는 세라믹 보트 헐로 실링해 열린 기공을 막아 줍니다.