Koch Chemie 젤코트 울트라 헤비 컷 희석비 & 사용 가이드

Koch Chemie 젤코트 울트라 헤비 컷 희석비 pH 스펙 카드

Gelcoat Ultra Heavy Cut

산화가 심하게 진행된 젤코트와 풍화된 보트 도장 복원을 목적으로 한 강력한 머신 컴파운드입니다. 실리콘 오일이 들어가지 않고 분진과 튐이 적어, 백화가 심한 마린 표면의 초기 절삭 단계에 활용됩니다.

브랜드
Koch Chemie
카테고리
Exterior : Polishes
기본 희석 비율
RTU
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Polishes (기본)RTU1:0

사용법

  1. 헤비 컷 패드, 짧은 램스울 패드, 또는 트위스티드 울 패드에 콩알 크기 다섯 방울 정도를 짭니다.
  2. 본격 작업 전에 낮은 회전수로 컴파운드를 패널 전체에 펴 발라 둡니다.
  3. 로터리는 1000 rpm 이내, 이센트릭은 최고 단계로 십자 방향 작업해 표면을 평탄화합니다.
  4. 폴리시 앤 실링 타올로 잔여물을 닦고, 짙은 색 젤코트에서는 젤코트 마이크로 컷으로 자국을 다듬습니다.
  5. 마무리로 젤코트 피니시, 마린 프로텍티브 실런트 또는 세라믹 보트 헐로 실링해 열린 기공을 막아 줍니다.

Aggressive machine compound created for restoring badly oxidised gelcoats and weathered boat paint. The silicone-oil-free formula generates little dust or sling, making it suitable as a starting cut for severely chalked marine surfaces.

Key features

  • Aggressive cutting power
  • Silicone-oil-free chemistry
  • Low dust and sling profile
  • Targeted at oxidised gelcoats

Usage

  1. Place about five pea-sized drops onto a Heavy Cut Pad, short Lambswool Pad, or Twisted Wool Pad.
  2. Spread the compound across the panel at low speed before fully engaging the machine.
  3. Work crosswise on a rotary capped at 1000 rpm or an eccentric set to its highest setting until the surface is leveled.
  4. Wipe residue with a Polish and Sealing Towel; on dark gelcoat, refine remaining marks with Gelcoat Micro Cut.
  5. Finish by sealing with Gelcoat Finish, Marine Protective Sealant, or Ceramic Boat Hull to close the open pores.

다른 이름: KCX, koch-chemie, 코흐, 코흐케미, GUH, Gelcoat HC, Koch GUH, KC GUH, 코흐케미 젤코트 울트라 헤비 컷, Gh9.01

View in English

관련 제품

Koch Chemie의 다른 제품

같은 카테고리(Polishes) 제품

더 보기