Glide Clay Lube
글라이드 클레이 루브
Glide is a dedicated clay bar lubricant formulated to make the claying process safer and more efficient. Its slip agent blend encapsulates debris dislodged during claying, allowing the detailing clay bar to glide across paintwork, glass, and wheels with minimal friction and reduced risk of marring. Used in combination with Auto Finesse's Fine Detailing Clay Bar, it delivers a smooth, glass-like finish by removing deeply embedded impurities.
글라이드는 클레이 작업을 더욱 안전하고 효율적으로 만들기 위해 설계된 클레이 바 전용 윤활제입니다. 미끄럼 성분이 클레이 작업 중 떨어지는 이물질을 감싸서, 클레이 바가 도장면, 유리, 휠 위를 마찰 없이 부드럽게 움직이도록 도와 흠집 발생 위험을 최소화합니다. 파인 디테일링 클레이 바와 함께 사용하면 깊이 박힌 오염물질까지 제거해 유리처럼 매끄러운 마감을 완성합니다.
- Brand
- Auto Finesse
- Categories
- Exterior : Remover
- Primary dilution
- RTU
Key features
- Slip agents reduce friction during clay bar use
- Encapsulates dislodged debris to prevent marring
- Designed for use with Auto Finesse Fine Clay Bar
- Safe and effective on paint, glass, and wheels
- Removes deeply embedded impurities
Dilution
- Exterior : Remover — RTU (1:0) (primary)
Usage
- Spray Glide liberally onto the paintwork panel you are about to clay.
- Glide the clay bar back and forth across the lubricated surface, applying additional Glide whenever any resistance is felt.
- After claying, wipe away any remaining lubricant residue with a clean microfibre cloth.
- Repeat across all panels, glass, and wheel surfaces as needed.
핵심 특징
- 미끄럼 성분으로 클레이 작업 시 마찰 최소화
- 탈락된 이물질을 감싸 흠집 방지
- 오토 피네스 파인 클레이 바와 함께 사용 권장
- 도장면, 유리, 휠에 안전하게 사용 가능
- 깊이 박힌 오염 물질 제거
사용법
- 클레이 작업을 시작할 패널에 글라이드를 충분히 분사합니다.
- 클레이 바를 윤활된 표면 위에서 앞뒤로 움직이며 작업하고, 저항감이 느껴질 때마다 글라이드를 추가로 분사합니다.
- 클레이 작업 후 남은 윤활제 잔여물을 깨끗한 마이크로파이버 타월로 닦아냅니다.
- 필요에 따라 모든 패널, 유리 및 휠 표면에 동일하게 반복합니다.
Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Glide Clay Lube, AF Glide Clay Lube, Glide, Auto Finesse Glide, AF Glide, GCL, Auto Finesse GCL, AF GCL, 오토 피네스 글라이드, 오토 피네스 GCL
한국어로 보기