ADBL One Cut Pro Dilution Ratios & User Guide

ADBL One Cut Pro dilution ratio and pH specification chart

원 컷 프로

ADBL One Cut Pro — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/adbl/one-cut-pro

ADBL 원 컷 프로 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/adbl/one-cut-pro

One Cut Pro is a cutting and polishing compound made for harder clear coat and acrylic paints, capable of clearing demanding defects including P1000 sanding marks. It can run as a preparatory step before finishing or as a single-step product, with low dust, a long working time, and easy wipe-off. The formula is water-based and free of polymers.

원 컷 프로는 경도가 높은 클리어 코트 및 아크릴 도장면용 컷 앤 폴리싱 컴파운드로, P1000 샌딩 자국을 포함한 까다로운 결함을 제거합니다. 피니싱 전 전처리 단계로도, 원스텝 제품으로도 쓸 수 있으며 저분진, 긴 작업 시간, 손쉬운 닦아내기가 특징입니다. 수성이며 폴리머가 들어가지 않은 성분입니다.

Brand
ADBL
Categories
Exterior : Polishes
Primary dilution
RTU
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU1:0

Usage

  1. Use as is without dilution; shake well before use.
  2. Apply to an unprimed pad, using up to 4 drops per 40 x 40 cm panel section.
  3. Work the compound on a clean surface with a dual-action or rotary machine, avoiding direct sunlight.
  4. After polishing, degrease the paint to remove any compound residue.

핵심 특징

  • P1000 샌딩 자국 제거
  • 경질 도장면에 적합
  • 전처리 또는 원스텝 제품으로 사용
  • 저분진
  • 긴 작업 시간
  • 손쉬운 닦아내기
  • 수성, 폴리머 무첨가
  • 울, 마이크로파이버, 폼 패드와 함께 회전식 및 DA 머신 호환

사용법

  1. 희석 없이 그대로 사용하며 사용 전 충분히 흔들어 줍니다.
  2. 프라이밍하지 않은 패드에 40 x 40 cm 패널당 최대 4방울을 도포합니다.
  3. 깨끗한 표면에서 DA 또는 회전식 머신으로 작업하며 직사광선을 피합니다.
  4. 연마 후 남은 컴파운드를 제거하기 위해 도장면을 탈지합니다.

Also known as: ADBL One Cut Pro, OCP, ADBL OCP, 에이디비엘 원 컷 프로, ADB000653

한국어로 보기

Sources

Related products

More from ADBL

More Polishes products

Explore more