KiurLab TARPEN Dilution Ratios & User Guide

KiurLab TARPEN dilution ratio and pH specification chart

타르펜

KiurLab TARPEN — Exterior : Remover. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/kiurlab/tarpen

KiurLab 타르펜 — Exterior : Remover. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/kiurlab/tarpen

TARPEN is a tar and glue remover based on natural orange terpene, formulated to dissolve asphalt, bitumen, resin, and adhesive residues from paint, glass, rims, rubber, and plastics. Its terpene base makes it safer than conventional petroleum-solvent removers, while the product activates within seconds of application and evaporates slowly to provide extended working time on the surface.

TARPEN은 천연 오렌지 테르펜을 기반으로 한 타르·접착제 제거제로, 도장면, 유리, 휠, 고무, 플라스틱 등 다양한 소재의 아스팔트, 역청, 수지, 접착 잔여물을 효과적으로 용해합니다. 테르펜 성분은 석유계 용제보다 안전하며, 분사 후 수 초 내에 즉각 반응하고 서서히 증발하여 충분한 작업 시간을 제공합니다.

Brand
KiurLab
Categories
Exterior : Remover
Primary dilution
RTU
Last updated
2026-08-16

How it works

  • Glycol ether solvent — Dissolves oil film and traffic film; can soften some plastics and rubber.
  • Citrus solvent — Citrus-derived solvent that dissolves tar and adhesive.
  • anionic surfactants — Ionic types of the surfactants used in this product.
  • Solvent-based — Built mainly on organic solvents; ventilate and spot-test on interior plastics.

Disclosed ingredients

IngredientCASFunction
2-Butoxyethanol (ethylene glycol monobutyl ether)111-76-2Solvent
Orange terpenes (sweet orange oil terpenes)8028-48-6Solvent
Alcohols, C12-14, ethoxylated, sulfates, sodium salts (SLES)68891-38-3Anionic surfactant

Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.

Key features

  • Based on natural orange terpene — safer than petroleum solvents
  • Pleasant citrus scent
  • Fast activation within seconds of application
  • Slow evaporation provides extended dwell time
  • Removes tar, bitumen, resin, and sticker adhesive
  • Effective on paint, glass, rims, rubber, and plastics

Dilution

UseDilutionRatio
Exterior : Remover (primary)RTU1:0

Usage

  1. Shake the bottle before use. Avoid working in direct sunlight to prevent rapid evaporation.
  2. Test on an inconspicuous area of the surface first.
  3. Spray TARPEN onto the dry contaminated surface from approximately 10 cm away.
  4. Allow the product to dwell for a few minutes to dissolve contaminants.
  5. Rinse thoroughly with water under pressure, or wipe away dissolved residue with a microfiber cloth. Repeat if necessary.
  6. After use, flush the trigger with clean water to prevent clogging. Wash the treated area with car shampoo to remove any remaining product.

핵심 특징

  • 천연 오렌지 테르펜 기반 — 석유계 용제보다 안전
  • 상쾌한 시트러스 향
  • 분사 후 수 초 내 즉각 반응
  • 서서히 증발하여 충분한 작업 시간 제공
  • 타르, 역청, 수지, 스티커 접착제 제거
  • 도장·유리·휠·고무·플라스틱에 사용 가능

사용법

  1. 사용 전 병을 흔드세요. 빠른 증발을 막기 위해 직사광선을 피해 작업하세요.
  2. 눈에 띄지 않는 부위에 먼저 시험 도포하세요.
  3. 약 10cm 거리에서 건조한 오염 표면에 TARPEN을 분사하세요.
  4. 오염물이 용해되도록 수 분간 방치하세요.
  5. 고압수로 충분히 헹궈내거나, 마이크로파이버 천으로 용해된 잔여물을 닦아내세요. 필요 시 반복하세요.
  6. 사용 후 트리거를 깨끗한 물로 씻어 막힘을 방지하세요. 처리 부위를 전용 샴푸로 세차하여 잔여물을 제거하세요.

Also known as: kiru, 키우랩, KiurLab TARPEN, 키우랩 타르펜

한국어로 보기

Sources

  • KiurLab official product page
  • Safety Data Sheet (SDS / MSDS)

Related products

More from KiurLab

  • Pro Leather And Vinyl Paint Neutral
  • MI-WASH
  • Pro Leather Degreaser
  • Leather Balm
  • PRETEXT
  • Pro Leather Filler

More Remover products

  • Bilt Hamber Bilt Hamber Deox-Gel
  • CarCandy BoatCandy Hull Cleaner
  • Vonixx Strike
  • PAICAR Glue Remover
  • CarCandy Crush-It Concrete Remover
  • OPTI-COAT Opti-Coat MDR Mineral Deposit Remover

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)