Adam's Water Spot Remover
아담스 워터 스팟 리무버
Adam’s Water Spot Remover is a heavy-duty acid-based formula specifically designed to neutralize and dissolve the mineral deposits left behind by hard water and alkaline washes. Its thickened consistency clings to vertical surfaces, giving the active ingredients time to break down stubborn calcium and salt staining. Safe for use on paint, glass, and trim when used as directed.
Adam’s Water Spot Remover는 경수 및 알칼리성 세차 후 남는 미네랄 침착물을 산성 성분으로 빠르게 중화·제거하는 강력한 워터 스팟 클리너입니다. 점성 있는 젤 타입으로 수직면에서도 흘러내리지 않아 충분한 반응 시간을 확보할 수 있으며, 도막, 유리, 트림에 안전하게 사용할 수 있습니다.
- Brand
- Adam's Polishes
- Categories
- Exterior : Remover
- pH
- acid (4)
Key features
- Neutralizes and removes stubborn water stains
- Thickened formula clings to applied surfaces
- Acid-based for mineral deposit dissolution
- Safe on paint, glass, and trim
- Fast-acting formula
Usage
- Wash the vehicle or clean the target surface to remove loose contamination, then work in shade out of direct sunlight.
- Apply Water Spot Remover directly to the affected area and allow it to dwell for about one to two minutes without letting it dry.
- Agitate gently with a clean microfiber applicator or towel using light circular motions to help break down the mineral deposits.
- Rinse the area thoroughly with water, then inspect and repeat if any staining remains.
- Dry and follow with a detail spray, sealant, or wax to restore protection to the treated surface.
핵심 특징
- 완고한 워터 스팟 중화 및 제거
- 점성 있는 포뮬러로 표면 밀착
- 산성 기반 미네랄 침착물 분해
- 도막, 유리, 트림 안전
- 빠른 작용 포뮬러
사용법
- 차량을 세차하거나 대상 표면을 닦아 느슨한 오염물을 제거한 후, 직사광선을 피해 그늘에서 작업합니다.
- 워터 스팟 리무버를 해당 부위에 직접 도포하고 건조되지 않도록 약 1~2분간 반응시킵니다.
- 깨끗한 극세사 어플리케이터나 타월로 가볍게 원형으로 문질러 미네랄 침착물을 분해합니다.
- 물로 충분히 헹구고 표면을 점검한 후 얼룩이 남아 있으면 반복 작업합니다.
- 건조 후 디테일 스프레이, 실란트 또는 왁스로 마무리하여 처리 부위의 보호막을 복원합니다.