SHIFT Intensive Cleaner (Seconds)
쉬프트 인텐시브 클리너 (세컨즈)
SHIFT Intensive Cleaner is a powerful solvent-style cleaner formulated as a glue and tar remover that also tackles rubber, underseal, wax oil, engine grease and stubborn grime. It is the result of years of development for trackside prep, restorations and intensive cleaning tasks.
쉬프트 인텐시브 클리너는 글루 및 타르 리무버로 개발된 강력한 솔벤트 타입 클리너로, 고무, 언더씰, 왁스 오일, 엔진 그리스 및 끈적한 오염물까지도 효과적으로 제거합니다. 트랙사이드 준비, 복원 작업, 강력 세정 용도로 수년간 개발된 제품입니다.
- Brand
- Carbon Collective
- Categories
- Exterior : Remover, Exterior : Degreaser&Dewaxing
Key features
- Removes glue, tar and adhesive residue
- Removes underseal, waxoyl and rubber
- Removes engine grease, oil and grime
- Removes old tyre dressings and tyre soap
- Effective for restorations and trackside prep
Usage
- For tar, spray directly and dwell for a few seconds until brown liquid runs from the deposit, then wipe with a clean microfibre. Repeat as needed.
- For tyres, saturate a microfibre cloth, rub across the sidewall, re-apply, and rinse with water once clean.
- For wheel weight glue, spray directly, lift the foam backing with a squeegee or plastic blade, then re-apply and wipe the residue off with a microfibre.
- For engine bay grease, spray onto the area, dwell 1-2 minutes, agitate with a stiff brush if needed, and rinse to remove.
- For waxoyl or underseal, spray directly onto the affected area and wipe with a microfibre, repeating as needed.
- For tyre or track rubber, spray on the area and wipe lightly in a lifting motion until removed.
- Do not use on vehicle headlights or plastics. Wear gloves and test a small area before full application.
핵심 특징
- 접착제, 타르, 점착 잔여물 제거
- 언더씰, 왁소일, 고무 잔여물 제거
- 엔진 그리스, 오일, 그라임 제거
- 오래된 타이어 드레싱 및 타이어 솝 제거
- 복원 작업 및 트랙사이드 준비에 효과적
사용법
- 타르 제거 시 직접 분사 후 잔여물에서 갈색 액체가 흘러나올 때까지 몇 초 기다렸다가 깨끗한 마이크로파이버로 닦아냅니다. 필요시 반복합니다.
- 타이어에 사용할 때는 마이크로파이버 천을 충분히 적신 후 사이드월을 문지르고, 액체를 다시 도포한 뒤 깨끗해지면 물로 헹굽니다.
- 휠 웨이트 접착제는 직접 분사 후 스퀴지나 플라스틱 블레이드로 폼 백킹을 들어내고, 다시 분사하여 마이크로파이버로 잔여물을 닦아냅니다.
- 엔진 베이 그리스는 부위에 분사 후 1-2분간 머물게 하고 필요시 빳빳한 브러시로 문지른 뒤 물로 헹궈냅니다.
- 왁소일이나 언더씰은 해당 부위에 직접 분사 후 마이크로파이버로 닦아내며, 원하는 정도까지 반복합니다.
- 타이어 및 트랙 고무 제거 시에는 부위에 분사 후 천으로 들어 올리듯 가볍게 닦아 제거합니다.
- 차량 헤드라이트나 플라스틱에는 사용하지 말고, 장갑을 착용하며 사용 전 소량으로 테스트합니다.