Innova Car SP1 Prewash Dilution Ratios & User Guide

Innova Car SP1 Prewash dilution ratio and pH specification chart

SP1 프리워시

Innova Car SP1 Prewash — Exterior : Foam, alkali pH, base dilution 1:3~1:9. At 1:3, mix about 333.3 ml of Innova Car SP1 Prewash per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/innova-car/sp1-prewash

Innova Car SP1 프리워시 — Exterior : Foam, pH alkali, 기본 희석 1:3~1:9. 1:3 기준 물 1L당 Innova Car SP1 프리워시 약 333.3ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/innova-car/sp1-prewash

SP1 Prewash is an alkaline touchless prewash shampoo whose wet active foam lifts traffic film, bugs, oil, and grease without mechanical contact. It uses plant-derived surfactants and patented enzymes for deeper organic decontamination and stays safe over nanotechnological coatings.

SP1 프리워시는 알칼리성 터치리스 프리워시 샴푸로, 액티브 웻 폼이 표면에 닿지 않고도 도로 오염막, 벌레, 유분을 떠올립니다. 식물성 계면활성제와 특허 효소로 유기 오염을 더 깊이 분해하며 코팅 위에도 안전하게 쓸 수 있습니다.

Brand
Innova Car
Categories
Exterior : Foam, Exterior : Pre-washing (Pretreatment)
Primary dilution
1:3~1:9
pH
alkali (11)
Last updated
2026-05-31

Key features

Dilution

UseDilutionRatio
Exterior : Foam (primary)1:3~1:91:3-9
Exterior : Pre-washing (Pretreatment)1:25~1:501:25-50

Usage

  1. If mud is present, rinse with high-pressure water first to remove loose dirt.
  2. Dilute according to soiling level and method: 1:3~1:9 for foam lance, 1:25~1:50 for spray pump.
  3. Apply the active foam evenly across the vehicle starting from the dirtiest areas and lower sections, working upward.
  4. Let the foam dwell for 1–3 minutes without letting it dry on the surface.
  5. Rinse thoroughly with high-pressure water from top to bottom before proceeding to contact washing.

핵심 특징

  • 액티브 웻 폼의 터치리스 프리워시
  • 특허 효소로 유기 오염 제거
  • 식물성 계면활성제, NaOH·인·EDTA·NTA 무첨가
  • 고농축이며 헹굼이 쉬움
  • 코팅에 안전하고 플라스틱에 순함
  • pH 11.50 알칼리성

사용법

  1. 진흙이 있으면 먼저 고압수로 큰 오염물을 제거합니다.
  2. 오염 정도와 사용 방법에 따라 희석합니다: 폼 랜스는 1:3~1:9, 스프레이 펌프는 1:25~1:50.
  3. 차량의 가장 더러운 부위와 하단부터 시작해 위쪽으로 액티브 폼을 균일하게 도포합니다.
  4. 표면이 마르지 않도록 1~3분간 머금게 합니다.
  5. 고압수로 위에서 아래 방향으로 충분히 헹군 뒤 컨택트 세차로 진행합니다.

Also known as: innova, 이노바, 이노바카, Innovacar SP1 Prewash, IC SP1 Prewash, SP1, Innovacar SP1, IC SP1, 이노바카 SP1 프리워시, 이노바카 SP1, 79280

한국어로 보기

Sources

Related products

More from Innova Car

More Foam products

Explore more