Old Glory
올드 글로리
chemx · 케미컬엑스 · 케미컬x · 켐엑스 · Chem-X Old Glory · OG · 켐엑스 올드 글로리
Old Glory is a hyper-concentrated, high-pH (pH 13) touch-free active foam designed to cut through road film, grease, salt, bugs, and organic buildup without brushing. Engineered for fleet and heavy equipment applications, it delivers thick, clinging foam through foam cannons, foam injectors, or pump sprayers and rinses streak-free at proper dilution.
올드 글로리는 pH 13의 고농축 터치리스 액티브 폼으로, 브러시 없이도 도로 오염, 기름때, 염분, 벌레 자국, 유기물 오염을 효과적으로 제거합니다. 플리트 차량과 대형 장비에 적합하며, 폼 캐논, 폼 인젝터, 펌프 스프레이어를 통해 두꺼운 밀착 폼을 도포하고 얼룩 없이 헹굴 수 있습니다.
- Brand
- Chem-X
- Categories
- Exterior : Foam, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:4
- pH
- alkali (13)
Key features
- Touch-free single-step cleaning without brushing
- High-pH formula (pH 13) for heavy-duty decontamination
- Hyper-concentrated — effective at 100:1 injection ratio
- Thick clinging foam for extended dwell time
- Fast rinse with no streaks or residue
- Compatible with foam cannons, injectors, and pump sprayers
Dilution
- Exterior : Foam — 1:4 (1:4) (primary)
- Exterior : Pre-washing (Pretreatment) — 1:100 (1:100)
Usage
- Rinse the vehicle with water to remove loose debris before applying foam.
- For foam cannon: mix at 1:4 (Old Glory to water) in the cannon bottle. For pump sprayer: dilute at 1:100. For power washer injector: run at 100:1 PIR.
- Apply foam evenly over the entire vehicle surface and allow 30–60 seconds of dwell time; do not let it dry on the surface.
- Rinse thoroughly with high-pressure water to flush all foam and loosened contaminants.
핵심 특징
- 브러시 없이 터치리스 단계 세정
- 강력한 고알칼리 포뮬러 (pH 13)
- 100:1 인젝션 비율에서도 효과적인 고농축 설계
- 긴 반응 시간을 위한 두꺼운 밀착 폼
- 얼룩이나 잔여물 없는 빠른 헹굼
- 폼 캐논, 인젝터, 펌프 스프레이어 호환
사용법
- 폼을 도포하기 전에 물로 차량을 헹궈 느슨한 오염물을 제거합니다.
- 폼 캐논 사용 시: 올드 글로리와 물을 1:4 비율로 캐논에 채웁니다. 펌프 스프레이어: 1:100으로 희석합니다. 고압 세척기 인젝터: 100:1 PIR로 사용합니다.
- 차량 전체에 폼을 고르게 도포하고 30~60초 반응시키되, 표면에서 건조되지 않도록 주의합니다.
- 고압수로 폼과 오염물을 완전히 헹궈 냅니다.