SiNH Top Coat
사이엔에이치 탑 코트
innova · 이노바 · 이노바카 · Innovacar SiNH Top Coat · IC SiNH Top Coat · STC · Innovacar STC · IC STC · 이노바카 사이엔에이치 탑 코트 · 이노바카 STC · 700406
SiNH Top Coat is a nanoceramic coating that uses Innovacar Si-N-H technology to deliver the strongest water repellency and gloss depth in the Innovacar coating line. Applied as a top layer, it forms a durable hydrophobic barrier that shields paint from UV, corrosion, and high temperatures, with rated durability of around 4 to 5 years. It is PFAS-free, cures without IR lamps, and can also be used on PPF, matte finishes, and wrapped vehicles.
SiNH 탑 코트는 이노바카 Si-N-H 기술을 적용한 나노세라믹 코팅으로, 이노바카 코팅 라인에서 가장 강한 발수력과 광택 깊이를 냅니다. 탑 레이어로 도포하면 발수 막을 형성해 도장면을 자외선, 부식, 고온으로부터 보호하며 약 4~5년 지속되는 것으로 평가됩니다. PFAS 무함유로 IR 램프 없이 경화되고 PPF, 무광 도장, 랩핑 차량에도 쓸 수 있습니다.
- Brand
- Innova Car
- Categories
- Exterior : Coating
Key features
- Strongest water beading and sheeting in the Innovacar ceramic line
- Rated durability around 4 to 5 years (75,000 km / 60+ washes)
- Cures in about 20 min at room temperature, no IR lamp needed
- Antistatic and self-cleaning dirt-repellent effect
- Heat-activated self-repair of micro-scratches
- For bodywork, PPF, matte finishes, and wrapping
- PFAS-free, VOC-compliant formulation
Usage
- Prepare the surface: prewash, wash, chemically decontaminate (tar, iron, limescale), then mechanically decontaminate with clay bar, polish if needed, and panel wipe with D2 Check.
- Apply a few drops of SiNH Top Coat to a Micron Suede wrapped around a Foam App Block and spread using the Criss-Cross method, treating one 50×50 cm panel at a time.
- Allow to polymerise for 30 seconds (warm) to 2 minutes (cool), then remove excess product with a Micron Buffing Wipe. If not removed within 10 minutes, reapply to even out.
- After 4 hours, apply SC0 Hydro Sealant as the final protective layer. Wait 3-4 hours before exposing to outdoor conditions and 7 days before washing.
핵심 특징
- 이노바카 세라믹 라인에서 가장 강한 비딩과 흘림 효과
- 약 4~5년 지속 평가 (75,000km / 세차 60회 이상)
- 실온에서 약 20분 경화, IR 램프 불필요
- 정전기 방지와 자가 세정 오염 방지 효과
- 고온에서 미세 스크래치 자가 복원
- 차체, PPF, 무광 도장, 랩핑에 적용
- PFAS 무함유, VOC 규정 준수 성분
사용법
- 표면을 준비합니다: 사전세차, 세차, 화학적 오염 제거(타르, 철분, 석회질), 클레이 바로 기계적 오염 제거, 필요 시 폴리싱 후 D2 체크로 패널 와이프를 진행하세요.
- 폼 앱 블록에 감싼 마이크론 스웨이드에 SiNH 탑 코트를 몇 방울 떨어뜨린 후, 크리스크로스 방식으로 한 번에 약 50×50cm 패널씩 도포하세요.
- 30초(고온 시)~2분(저온 시) 동안 중합시킨 뒤, 마이크론 버핑 와이프로 잔여 제품을 제거하세요. 10분 내에 제거되지 않으면 다시 도포하여 균일하게 펴주세요.
- 4시간 후 SC0 하이드로 실란트를 마지막 보호 레이어로 도포하세요. 외부 노출 전 3~4시간, 세차 전 7일을 기다리세요.