Innova Car 사이엔에이치 탑 코트 희석비 & 사용 가이드

Innova Car 사이엔에이치 탑 코트 희석비 pH 스펙 카드

SiNH Top Coat

SiNH 탑 코트는 이노바카 Si-N-H 기술을 적용한 나노세라믹 코팅으로, 이노바카 코팅 라인에서 가장 강한 발수력과 광택 깊이를 냅니다. 탑 레이어로 도포하면 발수 막을 형성해 도장면을 자외선, 부식, 고온으로부터 보호하며 약 4~5년 지속되는 것으로 평가됩니다. PFAS 무함유로 IR 램프 없이 경화되고 PPF, 무광 도장, 랩핑 차량에도 쓸 수 있습니다.

브랜드
Innova Car
카테고리
Exterior : Coating
기본 희석 비율
RTU
최종 업데이트
2026-06-02

핵심 특징

희석 비율

용도희석비율
Exterior : Coating (기본)RTU1:0

사용법

  1. 표면을 준비합니다: 사전세차, 세차, 화학적 오염 제거(타르, 철분, 석회질), 클레이 바로 기계적 오염 제거, 필요 시 폴리싱 후 D2 체크로 패널 와이프를 진행하세요.
  2. 폼 앱 블록에 감싼 마이크론 스웨이드에 SiNH 탑 코트를 몇 방울 떨어뜨린 후, 크리스크로스 방식으로 한 번에 약 50×50cm 패널씩 도포하세요.
  3. 30초(고온 시)~2분(저온 시) 동안 중합시킨 뒤, 마이크론 버핑 와이프로 잔여 제품을 제거하세요. 10분 내에 제거되지 않으면 다시 도포하여 균일하게 펴주세요.
  4. 4시간 후 SC0 하이드로 실란트를 마지막 보호 레이어로 도포하세요. 외부 노출 전 3~4시간, 세차 전 7일을 기다리세요.

SiNH Top Coat is a nanoceramic coating that uses Innovacar Si-N-H technology to deliver the strongest water repellency and gloss depth in the Innovacar coating line. Applied as a top layer, it forms a durable hydrophobic barrier that shields paint from UV, corrosion, and high temperatures, with rated durability of around 4 to 5 years. It is PFAS-free, cures without IR lamps, and can also be used on PPF, matte finishes, and wrapped vehicles.

Key features

  • Strongest water beading and sheeting in the Innovacar ceramic line
  • Rated durability around 4 to 5 years (75,000 km / 60+ washes)
  • Cures in about 20 min at room temperature, no IR lamp needed
  • Antistatic and self-cleaning dirt-repellent effect
  • Heat-activated self-repair of micro-scratches
  • For bodywork, PPF, matte finishes, and wrapping
  • PFAS-free, VOC-compliant formulation

Usage

  1. Prepare the surface: prewash, wash, chemically decontaminate (tar, iron, limescale), then mechanically decontaminate with clay bar, polish if needed, and panel wipe with D2 Check.
  2. Apply a few drops of SiNH Top Coat to a Micron Suede wrapped around a Foam App Block and spread using the Criss-Cross method, treating one 50×50 cm panel at a time.
  3. Allow to polymerise for 30 seconds (warm) to 2 minutes (cool), then remove excess product with a Micron Buffing Wipe. If not removed within 10 minutes, reapply to even out.
  4. After 4 hours, apply SC0 Hydro Sealant as the final protective layer. Wait 3-4 hours before exposing to outdoor conditions and 7 days before washing.

다른 이름: innova, 이노바, 이노바카, Innovacar SiNH Top Coat, IC SiNH Top Coat, STC, Innovacar STC, IC STC, 이노바카 사이엔에이치 탑 코트, 이노바카 STC, 700406

View in English

출처

관련 제품

Innova Car의 다른 제품

같은 카테고리(Coating) 제품

더 보기