H20 Coat
H20 코트
innova · 이노바 · 이노바카 · Innovacar H20 Coat · IC H20 Coat · H20C · Innovacar H20C · IC H20C · 이노바카 H20 코트 · 이노바카 H20C · 79304
A water-repellent rinse-off treatment applied directly onto a wet vehicle, where it activates a hydrophobic barrier with sheeting and beading effects. It bonds to bodywork and exterior surfaces including glass, rims, and metal finishes for rain-repellent protection lasting up to about three months. It also speeds self-drying and keeps the vehicle cleaner after each wash.
젖은 차량에 직접 분사한 뒤 헹궈내는 발수 트리트먼트로, 시트 효과와 비딩 효과를 내는 소수성 장벽을 활성화합니다. 도장면과 유리·휠·금속 마감재 등 외장 표면에 부착되어 약 3개월까지 방수 효과를 줍니다. 자연 건조를 빠르게 하고 세차 후 차량을 더 깨끗하게 유지합니다.
- Brand
- Innova Car
- Categories
- Exterior : Coating
- Primary dilution
- 1:1~1:3
- pH
- neutral (6)
Key features
- Hydrophobic coating activated on a wet car
- Sheeting and beading water effects
- Protection lasting up to about 3 months
- For body, glass, rims, and metal finishes
- Speeds self-drying
- Bird-dropping and chemical protection
- Underbody and salt protection
Dilution
- Exterior : Coating — 1:1~1:3 (1:1-3) (primary)
Usage
- Shake the product before use.
- Wash and decontaminate the car beforehand.
- With the car still wet, spray panel by panel from about 60 cm, working bottom to top and distributing evenly.
- Rinse the car thoroughly within about 15 seconds of application.
- Use the water layer technique: a gentle low-pressure rinse that cascades off most of the water.
- Finish drying with a Micron XXL microfibre cloth.
핵심 특징
- 젖은 차량에서 활성화되는 소수성 코팅
- 시트 효과와 비딩 효과
- 약 3개월까지 지속되는 보호
- 도장면·유리·휠·금속 마감재에 적용
- 자연 건조 촉진
- 버드 드롭·화학물질 보호
- 하부 차체·염분 보호
사용법
- 사용 전 제품을 흔들어 줍니다.
- 미리 차량을 세차하고 오염물을 제거합니다.
- 차량이 젖은 상태에서 약 60 cm 거리에서 아래에서 위로 패널별로 고르게 분사합니다.
- 도포 후 약 15초 이내에 차량을 충분히 헹굽니다.
- 물 막 기법으로 저압 헹굼을 흘려보내 대부분의 수분을 제거합니다.
- Micron XXL 마이크로파이버 천으로 나머지 물기를 닦아 마무리합니다.