SC2 Dressing
SC2 드레싱
innova · 이노바 · 이노바카 · Innovacar SC2 Dressing · IC SC2 Dressing · SC2 · Innovacar SC2 · IC SC2 · 이노바카 SC2 드레싱 · 이노바카 SC2
SC2 Dressing is a water-based nanotechnology dressing that revives interior and exterior plastics, vinyl, rubber, leather, and acrylic surfaces. Its SiO2 siloxane and fluoroadditive formula leaves a non-greasy deep finish and forms a hydrophobic, UV-resistant barrier. The hydrocarbon-free composition keeps it safe on delicate surfaces and in high-temperature areas such as engine compartments.
SC2 드레싱은 실내외 플라스틱, 비닐, 고무, 가죽, 아크릴 표면에 생기를 더하는 수성 나노기술 드레싱입니다. SiO2 실록산과 불소첨가제 성분이 기름기 없는 깊은 마감을 남기고 발수성 자외선 차단 막을 형성합니다. 탄화수소를 넣지 않아 예민한 소재나 엔진룸 같은 고온 부위에도 안전하게 쓸 수 있습니다.
- Brand
- Innova Car
- Categories
- Interior : Trim Sealants, Exterior : Tire&Wheel Sealant
- Primary dilution
- 1:5
- pH
- neutral (6)
Key features
- SiO2 siloxane and fluoroadditive hydrophobic barrier
- UV-resistant, withstands high temperatures without whitening
- Hydrocarbon and petroleum-distillate free
- Non-greasy finish for leather, rubber, and plastics
- Deep matte black restoration with colour retention
- Slows ageing of fabrics and leather
- Creamy texture that resists dripping on vertical surfaces
Dilution
- Interior : Trim Sealants — 1:5 (1:5) (primary)
- Exterior : Tire&Wheel Sealant — 1:5 (1:5)
Usage
- Clean and decontaminate the surface before applying SC2 Dressing.
- Apply 2–3 sprays onto a low-pile microfibre cloth or pad.
- Work panel by panel in a crisscross pattern — apply horizontally right to left, then vertically top to bottom, covering the entire surface.
- After about 20 minutes, a second coat may be applied to enhance colour depth and effect.
- Allow up to 7 hours for full activation; protection lasts up to 5 months. Do not apply to tyre tread.
핵심 특징
- SiO2 실록산과 불소첨가제 발수 막
- 자외선에 강하고 고온에서도 백화되지 않음
- 탄화수소 및 석유 유도체 무함유
- 가죽, 고무, 플라스틱에 적합한 기름기 없는 마감
- 색을 살리는 깊은 무광 블랙 복원
- 직물과 가죽의 노화를 늦춤
- 수직면에서 흘러내리지 않는 크리미한 제형
사용법
- SC2 드레싱 도포 전 표면을 세정하고 오염 제거 작업을 완료합니다.
- 짧은 파일 마이크로파이버 천 또는 패드에 2~3회 스프레이합니다.
- 패널별로 교차 방식(수평 우→좌, 수직 상→하)으로 전체 면적을 커버하며 도포합니다.
- 약 20분 후 색상 깊이와 효과를 높이기 위해 2회 도포를 추가할 수 있습니다.
- 완전한 활성화까지 최대 7시간 대기하며, 보호 효과는 최대 5개월입니다. 타이어 트레드에는 도포하지 않습니다.