Innova Car S1 Wash&Coat Dilution Ratios & User Guide

Innova Car S1 Wash&Coat dilution ratio and pH specification chart

S1 워시앤코트

Innova Car S1 Wash&Coat — Exterior : Bucket Car Shampoo, neutral pH, base dilution 1:50~1:80. At 1:50, mix about 20 ml of Innova Car S1 Wash&Coat per 1 L of water. For a foam cannon or an exact bucket amount, use the Find Your Detail dilution calculator on the product page: https://findyourdetail.io/products/innova-car/s1-wash-and-coat

Innova Car S1 워시앤코트 — Exterior : Bucket Car Shampoo, pH neutral, 기본 희석 1:50~1:80. 1:50 기준 물 1L당 Innova Car S1 워시앤코트 약 20ml. 폼캐논이나 정확한 버킷 용량은 제품 페이지의 Find Your Detail 희석 계산기에서 계산하세요: https://findyourdetail.io/products/innova-car/s1-wash-and-coat

S1 Wash&Coat is a nanotechnology 3-in-1 shampoo that washes, seals, and leaves a water-repellent effect in one application, cutting steps in the wash cycle. The SiO2-enriched enzyme formula provides organic cleaning and forms a hydrophobic barrier that can extend the life of existing coatings for several months. It suits the upkeep of ceramic and nanotechnological protective layers.

S1 워시앤코트는 한 번의 적용으로 세정, 실링, 발수 효과를 내는 나노기술 3-in-1 샴푸로 세차 단계를 줄여 줍니다. SiO2 강화 효소 포뮬라가 유기물 세정을 하고 소수성 보호막을 만들어 기존 코팅의 수명을 수개월 연장할 수 있습니다. 세라믹 및 나노기술 보호 레이어 유지 관리에 적합합니다.

Brand
Innova Car
Categories
Exterior : Bucket Car Shampoo, Exterior : Coating
Primary dilution
1:50~1:80
pH
neutral (6)
Last updated
2026-05-31

Key features

Dilution

UseDilutionRatio
Exterior : Bucket Car Shampoo (primary)1:50~1:801:50-80

Usage

  1. Shake the product before use.
  2. After pre-washing, prepare two buckets with grit guards on the bottom.
  3. Fill the first bucket with the diluted product, adding product first, then water to make foam.
  4. Dip a wash mitt into the product bucket and work the car top down, panel by panel, with light pressure.
  5. Rinse the mitt in the water-only bucket between panels, using the grit guard to remove debris.
  6. Use a second clean mitt for the lower sections of the car.
  7. Rinse the car with a water veil from the top down to aid sheeting and self-drying.
  8. Dry remaining droplets with an XXL microfibre cloth.
  9. For a stronger water-repellent effect, apply a few drops of undiluted product on a damp mitt, wipe the wet car, then rinse.
  10. Allow several hours for full activation; the effect lasts several months.

핵심 특징

  • 3-in-1: 세정, 실링, 발수 처리를 한 번에
  • SiO2 보호막으로 코팅 수명 연장에 도움
  • 효소 기반 유기물 오염 제거
  • 수개월 지속되는 소수성 효과
  • 자외선 차단 장벽
  • 코팅 안전 나노기술 포뮬라
  • 농축형, 소량으로 효과적

사용법

  1. 사용 전 제품을 충분히 흔듭니다.
  2. 사전 세차 후 바닥에 그릿 가드가 있는 버킷 두 개를 준비합니다.
  3. 첫 번째 버킷에 희석한 제품을 채웁니다. 제품을 먼저 넣고 물을 부어 거품을 만듭니다.
  4. 세차 미트를 제품 버킷에 담근 뒤 차량 상단부터 아래로 패널별로 가볍게 닦습니다.
  5. 패널 사이 물 버킷에 미트를 담가 그릿 가드로 이물질을 제거합니다.
  6. 차량 하단에는 두 번째 깨끗한 미트를 사용합니다.
  7. 위에서 아래로 물을 흘리는 워터 베일 기법으로 헹궈 시트 효과와 자연 건조를 돕습니다.
  8. 남은 물방울은 XXL 마이크로파이버 천으로 건조합니다.
  9. 발수 효과를 높이려면 희석하지 않은 제품 몇 방울을 젖은 미트에 묻혀 차량에 바른 뒤 헹굽니다.
  10. 완전 활성화까지 수 시간을 두며, 효과는 수개월 지속됩니다.

Also known as: innova, 이노바, 이노바카, Innovacar S1 Wash&Coat, IC S1 Wash&Coat, S1WC, Innovacar S1WC, IC S1WC, 이노바카 S1 워시앤코트, 이노바카 S1WC, 79286

한국어로 보기

Sources

Related products

More from Innova Car

More Bucket Car Shampoo products

Explore more