S4 Rinseless&Coat
S4 린스리스앤코트
innova · 이노바 · 이노바카 · Innovacar S4 Rinseless&Coat · IC S4 Rinseless&Coat · S4 · Innovacar S4 · IC S4 · 이노바카 S4 린스리스앤코트 · 이노바카 S4 · 702041
S4 Rinseless&Coat is a 3-in-1 rinseless and waterless shampoo with probiotic Biotics Technology that cleans, polishes, and adds hydrophobic protection in one step on exterior surfaces. Its well-lubricated formula lowers the risk of micro-scratching and adds an antistatic gloss boost, while its drying-aid function helps reduce water spots.
S4 린스리스앤코트는 프로바이오틱스 바이오틱스 테크놀로지가 적용된 3-in-1 린스리스·워터리스 샴푸로, 한 번에 외부를 세정하고 광택을 더하며 발수 보호력을 부여합니다. 윤활성이 높은 포뮬러로 미세 스크래치 위험을 낮추고 정전기 방지 광택을 더하며, 건조 보조 기능으로 물자국을 줄여 줍니다.
- Brand
- Innova Car
- Categories
- Exterior : Rinseless&Waterless, Exterior : Coating
- Primary dilution
- 1:100~1:250
- pH
- neutral (6)
Key features
- Biotics Technology with patented probiotics
- 3-in-1: rinseless washing, polishing, and hydrophobic protection
- Well-lubricated formula lowers micro-scratching
- Antistatic gloss enhancement
- Works as a drying aid
- Biodegradable surfactants per Regulation 648/2004
- Full activation after several hours
- pH 6
Dilution
- Exterior : Rinseless&Waterless — 1:100~1:250 (1:100-250) (primary)
Usage
- For rinseless washing, dilute 1:100 to 1:250 in a bucket (20 to 50 ml per 5 L of water).
- Wait for surfaces to cool, then work on small sections at a time with a wash mitt.
- Spray the solution onto each section; do not let it dry on the surface.
- Rinse the mitt as needed and wipe each area dry with a clean microfibre cloth.
- For waterless washing and drying-aid use, dilute 1:100 (10 ml per 1 L), apply to a small area, wait 15 to 20 seconds, then wipe off in one direction with a folded cloth.
- Finish with a clean dry microfibre cloth. Shake before use. Full activation occurs after several hours.
핵심 특징
- 특허 프로바이오틱스 바이오틱스 기술
- 세정·광택·발수 3-in-1
- 윤활성 높은 포뮬러로 미세 스크래치 감소
- 정전기 방지 광택 향상
- 건조 보조제로 사용 가능
- 규정 648/2004에 따른 생분해 계면활성제
- 수 시간 후 완전 활성화
- pH 6
사용법
- 린스리스 세차 시 버킷에 1:100~1:250으로 희석합니다 (물 5L당 20~50ml).
- 표면이 식을 때까지 기다린 뒤 워시 미트로 소면적씩 작업합니다.
- 희석액을 각 구역에 분사합니다. 제품이 표면에서 마르지 않게 합니다.
- 필요 시 미트를 헹굈가며 작업한 뒤 깨끗한 마이크로파이버로 닦아냅니다.
- 워터리스 세차 및 건조 보조 시 1:100으로 희석(물 1L당 10ml)해 소면적에 도포하고 15~20초 후 접힌 천으로 한 방향으로 닦아냅니다.
- 깨끗하고 마른 마이크로파이버로 마무리합니다. 사용 전 흔들어 줍니다. 완전 활성화는 수 시간 후입니다.