Innova Car S1 워시앤코트 희석비 & 사용 가이드

S1 Wash&Coat is a nanotechnology 3-in-1 shampoo that washes, seals, and leaves a water-repellent effect in one application, cutting steps in the wash cycle. The SiO2-enriched enzyme formula provides organic cleaning and forms a hydrophobic barrier that can extend the life of existing coatings for several months. It suits the upkeep of ceramic and nanotechnological protective layers.

Key features

• 3-in-1: washes, seals, and water-repellent treatment in one step
• SiO2 barrier helps extend coating life
• Enzyme-based organic decontamination
• Hydrophobic effect lasting several months
• UV protection barrier
• Coating-safe nanotechnological formula
• Concentrated, effective with small volumes

Usage

1. Shake the product before use.
2. After pre-washing, prepare two buckets with grit guards on the bottom.
3. Fill the first bucket with the diluted product, adding product first, then water to make foam.
4. Dip a wash mitt into the product bucket and work the car top down, panel by panel, with light pressure.
5. Rinse the mitt in the water-only bucket between panels, using the grit guard to remove debris.
6. Use a second clean mitt for the lower sections of the car.
7. Rinse the car with a water veil from the top down to aid sheeting and self-drying.
8. Dry remaining droplets with an XXL microfibre cloth.
9. For a stronger water-repellent effect, apply a few drops of undiluted product on a damp mitt, wipe the wet car, then rinse.
10. Allow several hours for full activation; the effect lasts several months.