PC 5000 Pre Cut
PC 5000 프리 컷
인피니티 · 인피니티 왁스 · infinity · Zvizzer PC 5000 Pre Cut · PC5000 · PC 5000 · PC5000 프리 컷 · 즈비저 PC 5000 프리 컷 · 즈비저 PC 5000
PC 5000 Pre Cut is a pure pre-grinding compound for reconditioning extremely weathered or deeply scratched paintwork. Its high-volume, homogenous abrasive grain provides fast and optimum cutting to eliminate deep scratches and abrasion marks from P1500 grit size, and it is safe for all cured paints without silicone or solvents.
PC 5000 프리 컷은 심하게 열화되거나 깊이 긁힌 도장면을 복원하기 위한 순수 사전 연삭 컴파운드입니다. 균일한 고밀도 연마 입자로 P1500 이상의 깊은 스크래치와 마모 자국을 빠르고 효과적으로 제거하며, 실리콘 및 용제를 함유하지 않습니다.
- Brand
- Infinity Wax
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
Key features
- Pure pre-grinding compound for extreme paint damage
- Removes deep scratches and abrasion marks from P1500 grit
- Homogenous abrasive grain for fast, optimum cutting
- Compatible with all cured paints including scratch-resistant finishes
- Silicone-free and solvent-free
- Recommended with blue polishing pad
Dilution
- Exterior : Polishes — RTU (1:0) (primary)
Usage
- Apply a sufficient quantity of PC 5000 to the paint defect, surface, or polishing pad.
- At low speed (approximately 1,000 rpm), distribute evenly over the defect area.
- Increase speed to approximately 1,800 rpm and polish with light pressure to finish.
- Always use a clean polishing pad to prevent unnecessary surface damage.
핵심 특징
- 극심한 도장 손상을 위한 순수 사전 연삭 컴파운드
- P1500 이상의 깊은 스크래치 및 마모 자국 제거
- 빠르고 최적의 연마를 위한 균일한 연마 입자
- 스크래치 방지 도장을 포함한 모든 경화 도장면 호환
- 실리콘 및 용제 미함유
- 블루 폴리싱 패드 사용 권장
사용법
- 결함 부위, 도장면, 또는 폴리싱 패드에 PC 5000을 충분히 도포합니다.
- 약 1,000rpm의 저속으로 결함 부위 전체에 고르게 펴 줍니다.
- 속도를 약 1,800rpm으로 높이고 가벼운 압력으로 마무리 연마합니다.
- 불필요한 표면 손상 방지를 위해 항상 깨끗한 폴리싱 패드를 사용합니다.