HALOv2 Flexible Film Coating
헤일로 v2 플렉시블 필름 코팅
HALOv2 bonds chemically to the vehicle to add a dense, protective layer that boosts the performance of paint protection film and vinyl wraps. It strengthens dirt and water repellency and helps reduce UV damage. The flexible chemistry works on gloss, satin, and matte finishes without compromising the self-healing behavior of modern PPF.
HALOv2는 차량 표면과 화학적으로 결합해 고밀도 보호막을 형성하여 PPF와 비닐 랩의 성능을 강화하는 코팅입니다. 먼지·물 반발력을 높이고 자외선 손상 위험을 줄여줍니다. 유연한 포뮬러로 광택·새틴·무광 마감 모두에 사용할 수 있으며 최신 PPF의 자가 치유 성능을 손상시키지 않습니다.
- Brand
- GTECHNIQ
- Categories
- Exterior : Coating
Key features
- Single-layer application
- Up to about 2 years on PPF and vinyl
- Easier surface maintenance
- For gloss, satin, and matte finishes
- Chemically bonds to surface
- Compatible with self-healing PPF
- Low surface energy
Usage
- Shake the bottle and wear gloves.
- Keep the vehicle indoors during application and for at least 12 hours afterwards, with good lighting available.
- On previously installed film, wash and decontaminate with Gtechniq W5 and W6 first.
- Spray a 30 percent IPA dilution onto an MF1 ZeroR cloth.
- With the surface fully cool, buff off fingerprints and contaminants to maximise bonding.
- Apply HALOv2 evenly to the application pad and set the bottle aside.
- Apply in overlapping strokes across roughly 2ft by 2ft or along body lines.
- After each panel, remove residue with an MF1, working from outside the panel in.
- Do a final inspection with an MF1 cloth under a bright, diffused light to ensure no residue remains.
- Unopened HALOv2 has a 12-month shelf life from purchase.
- Store cool and dry, away from direct sunlight.
- Use within 3 months of opening.
핵심 특징
- 1회 도포
- PPF·비닐에서 최대 약 2년 지속
- 표면 관리 용이
- 광택·새틴·무광 마감 모두 사용 가능
- 표면과 화학적으로 결합
- 자가 치유 PPF와 호환
- 낮은 표면 에너지
사용법
- 병을 잘 흔들고 장갑을 착용합니다.
- 시공 중과 시공 후 최소 12시간 동안 차량을 실내에 두며, 밝은 조명을 확보합니다.
- 이미 시공된 필름 위에 도포할 때는 Gtechniq W5와 W6로 세척·제염을 먼저 진행합니다.
- Gtechniq MF1 ZeroR 천에 30% 희석한 이소프로필 알코올(IPA)을 분무합니다.
- 표면이 완전히 식은 상태에서 닦아 지문이나 오염물을 제거하여 결합력을 최대화합니다.
- HALOv2를 어플리케이션 패드에 고르게 적시고 보틀을 한쪽에 둡니다.
- 약 2ft x 2ft 영역 또는 차체 라인을 따라 겹쳐 도포합니다.
- 한 패널을 도포한 뒤 도포 범위 바깥에서 안쪽 방향으로 MF1 천으로 잔여물을 제거합니다.
- MF1 천과 밝고 분산된 조명으로 잔여물이 남았는지 최종 점검합니다.
- 미개봉 HALOv2의 유통기한은 구매일로부터 12개월입니다.
- 직사광선을 피해 서늘하고 건조한 곳에 보관합니다.
- 개봉 후 3개월 이내에 사용합니다.