Smart Fabric I1 V3
스마트 패브릭 I1 V3
I1 Smart Fabric V3 is a breathable fabric protectant that turns ordinary fabrics water-resistant and easier to clean by repelling water- and oil-based liquids. V3 adds anti-mold and anti-mildew chemistry and reaches a top-tier AATCC ISO 5 water repellency rating. Typical durability is about 6 to 12 months on car interiors and up to about 2 years on convertible roofs.
I1 스마트 패브릭 V3는 통기성을 유지하면서 일반 원단을 방수에 가깝게 만들어 청소를 쉽게 해 주는 발수 코팅으로, 수성과 유성 액체를 모두 잘 밀어냅니다. V3 버전에는 곰팡이 방지 기능이 추가되었고 AATCC ISO 5 최고 등급 발수력을 만족합니다. 차량 인테리어에서 약 6~12개월, 컨버터블 루프에서는 최대 약 2년까지 지속됩니다.
- Brand
- GTECHNIQ
- Categories
- Interior : Fabric Sealants
Key features
- Anti-mold and anti-mildew chemistry
- AATCC ISO 5 water repellency rating
- Breathable and durable
- Color-safe per-fibre coating
- Protects against water-based stains
- Repels water- and oil-based liquids
- About 6 to 12 months on interiors; up to about 2 years on convertible roofs
- Maintains performance after a 40-degree wash cycle
Usage
- For interior surfaces, prep with I2 TriClean.
- For exterior surfaces, use neat W5 Citrus All Purpose Cleaner on dirty areas, or dilute 5:1 with water for lighter soiling.
- Make sure cleaned surfaces are fully dry before applying I1; ideally 48 hours of good drying conditions, since fabric moisture must be under 15 percent.
- Shake well before use and wear gloves.
- Apply at 5 degrees Celsius or above in a ventilated area.
- Use out of direct sunlight.
- Spray evenly from about 15cm to fully saturate the fabric.
- Apply thoroughly in one pass since dried I1 will repel a second coat.
- Wipe up any overspray on adjacent substrates with an MF1 ZeroR cloth, and remove fabric overage with an MF1.
- Allow 24 hours of drying for full effect.
- Store in a cool, dry place.
- Use within 12 months of opening.
핵심 특징
- 곰팡이 방지 기능
- AATCC ISO 5 최고 등급 발수력
- 통기성과 내구성 양립
- 컬러 세이프 - 섬유 단위 코팅
- 수성 얼룩으로부터 보호
- 수성 및 유성 액체 모두 발수
- 차량 인테리어 약 6~12개월, 컨버터블 루프 최대 약 2년 지속
- 40도 세탁 후에도 성능 유지
사용법
- 인테리어 표면은 I2 TriClean으로 사전 세정합니다.
- 외부 표면은 심한 오염에 W5 시트러스 올퍼퍼스 클리너 원액을, 가벼운 오염에는 물과 5:1 희석해 사용합니다.
- 도포 전 세척 표면을 완전히 건조시킵니다. 좋은 건조 조건에서 48시간이 이상적이며, 원단 함수율이 15% 미만이어야 합니다.
- 사용 전 잘 흔들고 장갑을 착용합니다.
- 5°C 이상의 통풍이 잘 되는 곳에서 도포합니다.
- 직사광선을 피합니다.
- 약 15cm 거리에서 고르게 분무해 원단이 충분히 적셔지도록 합니다.
- 일단 마른 후에는 추가 도포가 발리지 않으므로 한 번에 꼼꼼히 도포합니다.
- 주변 재질에 튄 오버스프레이는 MF1 ZeroR 천으로 즉시 닦아내고, 원단의 잉여 제품도 MF1으로 닦아냅니다.
- 24시간 건조 후 최대 성능이 발휘됩니다.
- 서늘하고 건조한 곳에 보관합니다.
- 개봉 후 12개월 이내에 사용합니다.