Ethos Car Care Pure Cut Dilution Ratios & User Guide

Ethos Car Care Pure Cut dilution ratio and pH specification chart

퓨어 컷

Ethos Car Care Pure Cut — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ethos-car-care/pure-cut

Ethos Car Care 퓨어 컷 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ethos-car-care/pure-cut

Water-based, body-shop safe cutting compound using triple-filtered diminishing aluminum oxide abrasives to address heavy paint defects, oxidation, and P1500 sanding marks. Filler-free and silicone-free for a true correction result, with low dust and easy wipe-off on DA or rotary polishers. Refines moderate to severe defects toward a clearer finish.

삼중 여과된 다이미니싱 알루미늄 옥사이드 입자를 사용하는 수성 바디샵 컴파운드로, 심한 도장 결함, 산화, P1500 샌딩 자국까지 다룰 수 있습니다. 필러와 실리콘이 없어 결과가 그대로 드러나고, DA·로터리 폴리셔 모두에서 분진이 적고 닦아내기 쉬운 작업감을 제공합니다. 중~고난도 결함을 보정해 더 맑은 마감을 만들어줍니다.

Brand
Ethos Car Care
Categories
Exterior : Polishes
Primary dilution
RTU
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Dilution

UseDilutionRatio
Exterior : Polishes (primary)RTU1:0

Usage

  1. Start with the least aggressive pad needed; set DA speeds to 3 to 5 or rotary RPM to 600 to 1200.
  2. Prime a microfiber pad lightly or place 3 to 4 pea-size drops on a foam pad.
  3. Spread the product across a 2 ft by 2 ft section, then run slow overlapping passes with moderate pressure for 2 to 3 passes.
  4. Clean the pad on the fly, reload with 2 to 3 drops, and add a final no-pressure pass to refine clarity.
  5. Wipe residue with a clean microfiber and inspect under proper lighting; if haze remains, step down to a finer polish and pad.

핵심 특징

  • 다이미니싱 알루미늄 옥사이드 연마재
  • P1500 샌딩 자국·산화 대응
  • 수성, 바디샵 사용 안전
  • 필러·실리콘 미함유
  • 분진 적고 닦아내기 쉬움
  • DA·로터리 폴리셔 호환

사용법

  1. 필요한 가장 부드러운 패드부터 시작하고, DA는 3~5단, 로터리는 600~1200 RPM으로 설정합니다.
  2. 마이크로파이버 패드는 가볍게 프라이밍하고, 폼 패드에는 콩알 크기 3~4방울을 떨어뜨립니다.
  3. 약 60cm × 60cm 구획에 제품을 펴 바른 뒤 중간 압력으로 천천히 2~3패스 겹쳐 작업합니다.
  4. 작업 중 패드를 청소하고 2~3방울을 추가한 뒤 압력 없이 마무리 패스를 한 번 합니다.
  5. 깨끗한 마이크로파이버로 잔여물을 닦고 적절한 조명에서 점검하며, 흐림이 남으면 더 부드러운 폴리시와 패드로 단계를 낮춥니다.

Also known as: 에토스, 이토스, ethos, Ethos Pure Cut, PC, Ethos PC, 에토스 퓨어 컷, 에토스 PC

한국어로 보기

Sources

Related products

More from Ethos Car Care

More Polishes products

Explore more