EWOCAR Heavy Cut User Guide

EWOCAR Heavy Cut dilution ratio and pH specification chart

헤비 컷

EWOCAR Heavy Cut — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ewocar/heavy-cut

EWOCAR 헤비 컷 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ewocar/heavy-cut

Heavy Cut is a water-dilutable professional heavy-cut polishing compound engineered for fast, clean, and consistent paint correction. Despite its aggressive cutting power it maintains impressive gloss, making it an ideal first step in a two-step correction process. Removes sanding marks down to P1000 grit. Its advanced water-based formulation produces almost no dust and allows extended working cycles without premature drying. Free of silicones and fillers; compatible with rotary and dual-action polishers.

Heavy Cut은 빠르고 깔끔하며 일관된 도장 교정을 위해 개발된 수희석 가능한 전문가용 헤비컷 폴리싱 컴파운드입니다. 강한 절삭력에도 불구하고 뛰어난 광택을 유지하여 2단계 교정의 첫 번째 단계로 이상적입니다. P1000까지의 연마 흔적을 제거하며, 선진 수성 처방으로 먼지 발생이 거의 없고 이른 건조 없이 긴 작업 시간을 제공합니다. 실리콘 및 충전제 미함유; 로터리 및 더블액션 폴리셔 호환.

Brand
EWOCAR
Categories
Exterior : Polishes
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-02

Key features

Usage

  1. Ensure the paint surface is clean, dry, and free of contaminants. Heavy Cut can optionally be diluted with water if required — consult product guidance; use neat for full cutting power.
  2. Apply a moderate amount of Heavy Cut to an appropriate heavy-cut foam or wool pad.
  3. Set the polisher to a low speed and spread the compound evenly across the section before increasing to working speed.
  4. Work the section in overlapping passes until sanding marks and heavy defects are removed. The water-based formula allows extended working cycles without the compound drying out.
  5. Wipe off residue with a clean microfiber cloth. Proceed to a finishing stage (e.g., Fine Cut) to achieve the final high-gloss result.

핵심 특징

  • 수희석 가능한 헤비컷 컴파운드 — 2단계 교정의 첫 번째 단계
  • P1000까지의 연마 흔적 제거
  • 강한 절삭력에도 뛰어난 광택 유지
  • 이른 건조 없이 긴 작업 시간을 위한 수성 저분진 처방
  • 부드럽고 안정적인 폴리싱 경험
  • 실리콘 및 충전제 미함유; 로터리 및 더블액션 폴리셔 호환

사용법

  1. 도장 표면이 깨끗하고 건조하며 오염물이 없는지 확인합니다. Heavy Cut은 필요에 따라 물로 희석하여 사용할 수 있습니다 — 제품 안내를 참고하되, 최대 절삭력이 필요한 경우 원액으로 사용합니다.
  2. 적합한 헤비컷 폼 또는 울 패드에 Heavy Cut을 적당량 도포합니다.
  3. 폴리셔를 저속으로 설정하고 작업 구간 전체에 컴파운드를 고르게 펴 바른 후 작업 속도로 높입니다.
  4. 겹치는 패스로 작업 구간을 연마하며, 연마 흔적과 깊은 흠집이 제거될 때까지 작업합니다. 수성 처방 덕분에 컴파운드가 건조되지 않고 긴 작업 시간을 유지합니다.
  5. 깨끗한 극세사 타월로 잔여물을 닦아냅니다. Fine Cut 등 피니싱 단계로 이어서 최종 고광택 마감을 완성합니다.

Also known as: 이우카, EWO, 이우, Ewocar Heavy Cut, HC, 이워카 헤비 컷

한국어로 보기

Sources

Related products

More from EWOCAR

More Polishes products

Explore more