Ganbass GBS-WP02 User Guide

Ganbass GBS-WP02 dilution ratio and pH specification chart

Ganbass GBS-WP02 — Exterior : Polishes. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/ganbass/gbs-wp02

Ganbass GBS-WP02 — Exterior : Polishes. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/ganbass/gbs-wp02

A higher-abrasive water-based glass polishing compound for use with the Bosch GSS 23AE/MF orbital sander and Ganbass glass polishing pad. It shares the same water-based, silicone-free, wax-free characteristics as GBS-WP01 but offers greater cutting power for more stubborn oil film and mineral scale. It should be used after GBS-WP01 proves insufficient for the condition.

보쉬 GSS 23AE/MF 오비탈 샌더와 간바스 유리 전용 패드를 위한 연마력이 더 강한 수성 유리 연마제입니다. GBS-WP01과 동일한 수성·무실리콘·무왁스 특성을 가지면서 더 강력한 절삭력을 발휘합니다. GBS-WP01로 제거되지 않는 완고한 유막 및 물때에 사용합니다.

Brand
Ganbass
Categories
Exterior : Polishes
Last updated
2026-06-20

Key features

  • Higher abrasive power than GBS-WP01
  • Water-based, silicone-free, wax-free formula
  • For stubborn oil films and heavy mineral scale
  • Same gentle glass-safe approach as GBS-WP01
  • No separate degreasing required after use

Usage

  1. Wash the vehicle and rinse the glass surface to remove sand, dust, and loose contaminants.
  2. Apply an appropriate amount of the compound to the Ganbass glass polishing pad, distributing it evenly across the pad surface.
  3. Polish the glass with the GSS 23AE/MF sander; periodically wipe with a damp cloth wrung out well to check progress — hydrophilic areas indicate oil film removal, while beading areas still have residue.
  4. Once the entire surface is clean and oil-free, rinse thoroughly with water while wiping with a clean cloth to ensure no compound remains, then wipe dry with a fresh, clean cloth.

핵심 특징

  • GBS-WP01보다 높은 연마력
  • 수성·무실리콘·무왁스 포뮬러
  • 완고한 유막 및 강한 물때 제거용
  • GBS-WP01과 동일한 유리 친화적 방식
  • 사용 후 별도 탈지 작업 불필요

사용법

  1. 세차 후 유리 표면의 모래, 먼지, 오염물을 헹궈 제거합니다.
  2. 간바스 유리 전용 패드에 연마제를 적당량 골고루 도포합니다.
  3. GSS 23AE/MF 샌더로 유리를 연마하며, 중간중간 잘 짜낸 젖은 천으로 닦아 진행 상황을 확인합니다. 친수성 부분은 유막 제거 완료, 발수성 부분은 유막이 남아 있음을 나타냅니다.
  4. 전체 연마 완료 후, 깨끗한 천으로 닦으면서 물로 충분히 헹궈 연마제 잔여물이 없음을 확인하고 새 깨끗한 천으로 닦아냅니다.

Also known as: 간바스, ganbas, Ganbass GBS-WP02, 간바스 GBS-WP02, GBS WP02, ガラスバフGBS-WP02

한국어로 보기

Sources

  • Ganbass official product page

Related products

More from Ganbass

  • STREAM
  • Tire-Protection /0
  • REBOOT-PLUS
  • Rubber-Protection
  • Pollen Shampoo
  • Inner Glove Mesh Model

More Polishes products

  • REFLECTED The Polishing OIL
  • McKee's 37 All In One Headlight Restoring Polish
  • Nasiol CleaRub 705
  • Jax Wax Cap'n Polish
  • Menzerna One-Step Polish 3in1
  • Kamikaze Collection THE CUT EVOLUTION

Explore more

  • Category, comparison & dilution guides
  • What detailers actually use (video breakdowns)