Iron Remover
아이언 리무버
A color-changing iron fallout remover that reacts purple on contact with embedded ferrous particles in paint and wheels, signaling active contamination removal. Highly concentrated, it can be diluted 1:1 with water without sacrificing performance, and can also serve as a clay bar lubricant when used with a decontamination towel.
도장과 휠에 박힌 철분 오염물에 닿으면 보라색으로 변색되어 반응을 시각적으로 확인할 수 있는 아이언 폴아웃 제거제입니다. 고농도 제품으로 성능 저하 없이 1:1 물 희석이 가능하며, 제염 타월과 함께 클레이 바 윤활제로도 활용할 수 있습니다.
- Brand
- CLEAN.
- Categories
- Exterior : Remover
- Primary dilution
- 1:1
Key features
- Color-changing formula turns purple to indicate iron reaction
- Removes embedded iron particles from paint and wheels
- High concentration — dilutable 1:1 with water
- Non-abrasive, safe for all exterior surfaces
- Can double as clay lubricant with a decontamination towel
- Ideal pre-treatment before polishing or coating
Dilution
- Exterior : Remover — 1:1 (1:1) (primary)
Usage
- Ensure the surface is clean, cool, and out of direct sunlight. Shake well before use.
- Spray onto the surface and allow 1–2 minutes dwell time; do not let it dry.
- Rinse thoroughly with water.
- For heavy contamination, gently agitate with a damp microfiber towel or wash mitt, then rinse.
- Repeat if necessary for heavily contaminated surfaces.
핵심 특징
- 철분 반응 시 보라색으로 변하는 컬러 체인지 포뮬라
- 도장과 휠에 박힌 철분 오염물 제거
- 고농도 — 물 1:1 희석 가능
- 모든 외장 표면에 안전한 비연마성 포뮬라
- 제염 타월과 함께 클레이 윤활제로 겸용 가능
- 폴리싱 또는 코팅 전 이상적인 전처리 단계
사용법
- 표면이 깨끗하고 시원하며 직사광선이 닿지 않는지 확인한 후 잘 흔들어 사용합니다.
- 표면에 분사하고 1~2분간 방치하되 건조되지 않도록 합니다.
- 물로 충분히 헹굽니다.
- 심한 오염의 경우 젖은 극세사 타월이나 워시 미트로 부드럽게 문질러 준 후 헹굽니다.
- 심한 오염 표면에는 필요에 따라 반복 시공합니다.