Chemical Guys Wet Mirror Finish Glaze Dilution Ratios & User Guide

웻 미러 피니시 글레이즈
Chemical Guys Wet Mirror Finish Glaze — Exterior : Polishes, neutral pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/chemical-guys/wet-mirror-finish-glaze
Chemical Guys 웻 미러 피니시 글레이즈 — Exterior : Polishes, pH neutral. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/chemical-guys/wet-mirror-finish-glaze
Wet Mirror Finish Glaze is a synthetic gloss-enhancing glaze that bonds to the paint surface, filling light swirls and minor scratches to amplify light reflection and create a deep, wet-looking shine. It includes a built-in component that helps repel dust and static.
도장 표면에 결합해 미세 스월과 스크래치를 채우고 빛 반사를 극대화하는 합성 글레이즈입니다. 정전기와 먼지를 억제하는 성분이 포함되어 있으며, UV 차단 기능도 갖추고 있습니다.
- Brand
- Chemical Guys
- Categories
- Exterior : Polishes
- Primary dilution
- RTU
- pH
- neutral (8)
- Where to buy
- Search on Amazon (US)
- Last updated
- 2026-08-11
How it works
- Silicone gloss/beading film — Adds gloss and water beading, but must be stripped before paintwork.
- Natural wax — Natural waxes such as carnauba give a warm gloss.
- Abrasive particles — Fine particles cut the surface to remove defects and oxidation.
Disclosed ingredients
| Ingredient | CAS | Function |
|---|---|---|
| Water | 7732-18-5 | Diluent |
| Polydimethylsiloxane (dimethicone) | 63148-62-9 | Film former |
| Carnauba | 8015-86-9 | Wax |
| Natural Diatomaceous Earth | 61790-53-2 | Abrasive |
| Aluminum Oxide | 1344-28-1 | Abrasive |
| Isoalkanes | 68551-19-9 | Solvent |
| Polyethylene Glycol | 25322-68-3 | Humectant |
| DMDM hydantoin | 6440-58-0 | Preservative |
| Monomethylol dimethylhydantoin (MDM hydantoin) | 27636-82-4 | Preservative |
| AMIDS | 68155-20-4 | |
| Colorant | 72243-90-4 |
Ingredients disclosed in the manufacturer's Safety Data Sheet. A safety data sheet lists hazardous components only, so this is not a full formula.
Key features
- Bonds to the paint surface to fill light swirls and minor scratches, significantly boosting light reflection for a deep, wet-look finish.
- Built-in static-reducing component helps repel dust and airborne contaminants.
- Gloss-enhancing agents combined with UV protection help maintain the finish and resist fading.
Dilution
| Use | Dilution | Ratio |
|---|---|---|
| Exterior : Polishes (primary) | RTU | 1:0 |
Usage
- Apply 3–5 dots of glaze onto a foam or microfiber applicator pad. Spread a thin, even coat over the entire vehicle. Allow the glaze to bond with the surface for about 15 minutes, then buff off with a microfiber towel. After removal, allow about 30 minutes of cure time before applying an optional second coat.
핵심 특징
- 도장에 결합해 미세 스월과 스크래치를 채우고 빛 반사를 높여 깊고 촉촉한 광택을 구현합니다.
- 정전기 억제 성분이 먼지와 공기 중 오염물을 밀어냅니다.
- 광택 강화 성분과 UV 차단이 마감을 유지하고 퇴색을 억제합니다.
사용법
- 폼 또는 극세사 어플리케이터 패드에 글레이즈를 3~5 방울 올립니다. 차량 전체에 얇고 균일하게 도포합니다. 약 15분간 결합시킨 뒤 극세사 타월로 버핑합니다. 제거 후 약 30분 경화 시간을 두고 필요 시 2번째 코팅을 추가합니다.
Also known as: 케가, chemical-guys, chemical-guy, 케미컬가이, Chemical Guys Wet Mirror Finish Glaze, CG Wet Mirror Finish Glaze, WMFG, CG WMFG, 웻 Mirror 피니시 글레이즈, 케미컬 가이즈 웻 Mirror 피니시 글레이즈, 케미컬가이즈 웻 Mirror 피니시 글레이즈, Wet Mirror Finish
Sources
Related products
More from Chemical Guys
- Jet Seal Sealant & Paint Protectant
- Boar's Hair Detailing Brush
- Waffle Weave Gray Matter Microfiber Drying Towel
- C4 Clear Cut Correction Compound
- Convertible Top Protectant and Repellent
- Fresh Cherry Blast Air Freshener
More Polishes products
- PAICAR 03 Fine Cut
- Sonax PROFILINE NP 03-06
- 3D Car Care AAT 502 Finishing Polish
- Autobrite Direct Ultra Cut
- SWAG ALL IN ONE AIO V.2
- Adam's Polishes Adam's Glass Polish Clarifier & Revitalizer