LEALE - Medium compound
레알레 - 미디엄 컴파운드
LEALE is a water based, silicone free medium polish for delicate or sensitive paint. The synthetic abrasives target medium scratches, swirl marks, and sanding marks up to about 2500 grit, with a satin refined high gloss finish even on tacky, reflow, or extra soft clear coats. The brand Cold Technology approach allows correction at lower speeds, which limits the risk of holograms and heat damage.
LEALE는 민감하거나 섬세한 도장면을 위해 만들어진 수성, 실리콘 프리 중간 폴리시입니다. 합성 연마제가 약 2500그릿 정도까지의 샌딩 자국, 스월 마크, 중간 결함을 다루며 태키·리플로우·아주 무른 클리어 도장에서도 새틴 느낌의 고광택 마감을 잡아 줍니다. 콜드 테크놀로지 방식이라 저속에서도 결함을 보정할 수 있어 홀로그램과 열 손상의 위험을 줄여 줍니다.
- Brand
- Labocosmetica
- Categories
- Exterior : Polishes
Key features
- Clean medium polish cut
- Strong results at lower polishing speeds
- Works with both rotary and orbital polishers
- Easy to remove and friendly to trim
- Satin refined high gloss finish
- Low odour and low VOC
- Single step on hard, soft, or delicate paints
- Removes swirls, sanding marks up to about 2500 grit, and medium scratches
- Cold Technology limits hologram and heat risk
- Water based and silicone free
Usage
- Place about 3 drops of LEALE per 40 by 40 cm section on a sponge pad and clean the pad regularly to keep the cut consistent.
- Spread the product on a rotary or orbital polisher at speed 1, then build the speed to engage the cut, working the same section until the compound has broken down.
핵심 특징
- 깔끔한 미디엄 폴리시 컷
- 낮은 속도에서도 무리 없이 결과를 내는 사용성
- 로터리·오비탈 폴리셔 모두에 사용 가능
- 제거가 쉽고 트림에 부담이 적음
- 새틴 느낌의 고광택 마감
- 낮은 냄새와 낮은 VOC
- 하드·소프트·델리케이트 도장에 단일 단계 적용
- 스월 마크, 약 2500그릿 정도의 샌딩 자국, 중간 스크래치 제거
- 홀로그램과 열 손상 위험을 줄여 주는 콜드 테크놀로지
- 수성·실리콘 프리 포뮬러
사용법
- 40×40cm 구획마다 LEALE를 약 3방울 정도 스펀지 패드에 떨어뜨리고 컷이 균일하게 유지되도록 패드를 자주 청소합니다.
- 로터리·오비탈 1단에서 펴 바른 뒤 단계적으로 속도를 올려 컷 작업으로 전환하며 같은 구획을 컴파운드가 분해될 때까지 작업합니다.