Snake Oil Venom
스네이크 오일 베놈
chemx · 케미컬엑스 · 케미컬x · 켐엑스 · Chem-X Snake Oil Venom · SOV · 켐엑스 스네이크 오일 베놈
Snake Oil Venom is a touch-free graphene-infused foam sealant that delivers hydrophobic protection, enhanced gloss, and reduced drying time with a simple spray-on, rinse-off application. With an acidic pH of 4–5, it is safe for all exterior surfaces and coatings including polished aluminum. It provides up to 60–90 days of protection against UV rays and road salts, and prevents dirt and road film from bonding to the surface.
스네이크 오일 베놈은 그래핀이 함유된 무접촉 폼 실란트로, 분사 후 헹굼만으로 발수 보호막을 형성하고 광택을 높이며 건조 시간을 단축합니다. pH 4~5의 약산성으로 연마 알루미늄을 포함한 모든 외장 표면과 코팅에 안전하며, 자외선과 도로 염분으로부터 최대 60~90일간 보호합니다.
- Brand
- Chem-X
- Categories
- Exterior : Coating
- Primary dilution
- 1:4~1:4
- pH
- acid (4.5)
Key features
- Touch-free graphene foam sealant
- Spray-on, rinse-off application
- Up to 60–90 days UV and road salt protection
- Acidic pH 4–5 — safe for all surfaces and coatings
- Reduces drying time and enhances gloss
- Prevents dirt and road film adhesion
Dilution
- Exterior : Coating — 1:4~1:4 (1:4) (primary)
Usage
- Start with a clean, freshly rinsed wet vehicle.
- Add Snake Oil Venom to your foam cannon bottle at a 1:4 ratio (1 part product to 4 parts water), shake to mix, then foam onto the wet vehicle panel by panel.
- Allow to dwell for 30–60 seconds; do not let the product dry on the surface or apply in direct sunlight.
- Rinse thoroughly from top to bottom with clean water, then dry with a microfiber towel or forced air.
핵심 특징
- 무접촉 그래핀 폼 실란트
- 분사 후 헹굼으로 간편 시공
- 자외선 및 도로 염분으로부터 최대 60~90일 보호
- pH 4~5 약산성 — 모든 표면과 코팅에 안전
- 건조 시간 단축 및 광택 향상
- 오염물 및 도로 이물질 표면 부착 억제
사용법
- 깨끗하게 세차하고 헹군 후 젖은 상태의 차량을 준비합니다.
- 폼 캐논에 스네이크 오일 베놈을 1:4 비율(제품 1 : 물 4)로 넣고 흔들어 섞은 뒤, 젖은 차량에 패널별로 도포합니다.
- 30~60초 동안 반응시키며, 직사광선이나 뜨거운 패널에는 사용하지 마세요.
- 위에서 아래 방향으로 깨끗한 물로 완전히 헹군 후 마이크로파이버 타월이나 송풍기로 건조하세요.