Foam
폼
chemx · 케미컬엑스 · 케미컬x · 켐엑스 · Chem-X Foam · 켐엑스 폼
Foam is a concentrated, additive-free mitt wash soap that produces thick, long-lasting suds safe for vehicle surfaces and hands. It supports a wide dilution range and doubles as a prep wash to condition surfaces before applying any type of coating.
폼은 첨가제 없이 제조된 농축형 미트 세차 샴푸로, 차량 표면과 피부 모두에 안전한 풍성하고 오래 지속되는 거품을 형성합니다. 넓은 희석 범위를 지원하며, 각종 코팅 시공 전 표면을 준비하는 프렙 워시 용도로도 활용할 수 있습니다.
- Brand
- Chem-X
- Categories
- Exterior : Foam, Exterior : Bucket Car Shampoo
- Primary dilution
- 1:4~1:10
Key features
- Additive-free formula
- Thickest, longest-lasting foam
- Safe on wax and ceramic coatings
- Neutral pH, body shop safe
- Compatible with paint, polished aluminum, chrome, and glass
- Wide dilution range: 1:25 to 1:150
Dilution
- Exterior : Foam — 1:4~1:10 (1:4-10) (primary)
- Exterior : Bucket Car Shampoo — 1:56~1:333 (1:56-333)
Usage
- For foam cannon: add Foam to the cannon at a 1:4 to 1:10 ratio and fill the remainder with water.
- Tighten the foam cannon air knob fully for maximum foam thickness.
- Apply foam from bottom to top, working in sections to prevent drying.
- Agitate the surface with a mitt, sponge, or brush.
- Rinse from top to bottom.
- For bucket wash: add 1–6 oz to a full bucket of water and spray a hard stream of water into the bucket to activate foam.
핵심 특징
- 첨가제 없는 포뮬러
- 풍성하고 오래 지속되는 거품
- 왁스 및 세라믹 코팅 위에서 안전 사용 가능
- 중성 pH, 차체 도장 안전
- 도장면, 연마 알루미늄, 크롬, 유리에 모두 호환
- 1:25~1:150의 넓은 희석 범위
사용법
- 폼 캐논 사용 시: 폼을 1:4~1:10 비율로 캐논에 넣고 나머지를 물로 채웁니다.
- 최대 거품 두께를 위해 폼 캐논의 공기 조절 노브를 끝까지 조입니다.
- 건조를 방지하기 위해 아래에서 위 방향으로 구역별로 폼을 도포합니다.
- 미트, 스펀지 또는 브러시로 표면을 문질러 줍니다.
- 위에서 아래 방향으로 헹궈 냅니다.
- 버킷 세차 시: 물이 가득 찬 버킷에 폼 1~6oz를 넣고 강한 물줄기로 거품을 활성화합니다.