Ceramic Rims Cr0.01
세라믹 림 Cr0.01
Pen-applied ceramic sealant developed for painted wheels on cars, vans, motorcycles, and motorhomes. The cured film resists brake dust adhesion and weathering, becomes weatherproof after roughly a day, and reaches full hardness once nine days have passed.
승용차·상용차·모터사이클·캠핑카의 도장 휠 표면에 펜 어플리케이터로 도포하는 세라믹 코팅입니다. 경화된 막은 브레이크 더스트 부착과 풍화에 저항하고, 약 24시간이 지나면 내후성을 갖추며 9일 뒤에는 완전 경화 상태에 도달합니다.
- Brand
- Koch Chemie
- Categories
- Exterior : Coating
Key features
- Pen-applied painted-rim coating
- Weatherproof after 24 hours
- Fully cured after 9 days
- Avoid pH below 3 or above 12
- 6-month shelf life once opened
Usage
- Wash the wheel thoroughly first; loosen heavy brake dust with Magic Wheel Cleaner and a detail wheel brush.
- Wipe each rim with Panel Preparation Spray, or Silicone & Wax Remover diluted 1:4 with distilled water, then buff dry with a fresh sealing towel.
- Wear gloves from this point on; bare fingers leave oils that disturb adhesion of the ceramic film.
- Drip onto the application pen and spread evenly until a thin closed film is visible across the surface.
- Let the product flash off, then level any high spots and remove residue using a Coating Towel.
- Work between 15-25 degrees C with 40-50 percent humidity; shorten flash-off when warmer or more humid.
핵심 특징
- 펜형 어플리케이터로 도포
- 24시간 후 내후성 확보
- 9일 후 완전 경화
- pH 3 미만·12 초과 세제 회피
- 개봉 후 약 6개월 사용 권장
사용법
- 휠을 충분히 세척한 뒤 매직 휠 클리너와 디테일 휠 브러시로 굳은 브레이크 더스트를 풀어 줍니다.
- 패널 프리퍼레이션 스프레이 또는 증류수에 1:4로 희석한 실리콘 앤 왁스 리무버로 각 림을 닦은 뒤 새 폴리시 앤 실링 타올로 잘 말립니다.
- 이후 단계부터는 장갑을 착용하고, 맨손으로 표면에 닿지 않도록 합니다.
- 어플리케이션 펜에 제품을 떨어뜨려 전 표면에 얇고 연속된 액막이 보일 때까지 고르게 펴 바릅니다.
- 플래시 오프를 기다린 다음 코팅 타올로 잔여물과 불균일한 부분을 정리합니다.
- 기온 15~25도, 습도 40~50퍼센트가 적정하며, 더 덥거나 습할 때는 플래시 오프 시간을 짧게 가져갑니다.