Wheel Brush
휠 브러시
The Bilt Hamber Wheel Brush is a soft synthetic-bristle brush designed to agitate heavy contamination on alloy wheels without harming the finish. It measures about 215mm long with a roughly 20mm diameter head and 45mm bristles and is supplied with 1 litre Auto-Wheel; it pairs naturally with Auto-Wheel and Korrosol.
빌트햄버 휠 브러시는 알로이 휠 표면을 손상시키지 않고 무거운 오염을 풀어내도록 설계된 합성 모 브러시입니다. 전체 길이 약 215mm, 헤드 직경 약 20mm, 모 길이 약 45mm로 1리터 Auto-Wheel 제품에 동봉되며 Auto-Wheel·Korrosol과 함께 사용하기에 적합합니다.
- Brand
- Bilt Hamber
- Categories
- Tools : Wash Supplies
Key features
- Soft synthetic bristles safe for alloy finishes
- Reaches inner barrels, spokes and tight areas
- About 215mm long with around 20mm head
- Designed to pair with Auto-Wheel and Korrosol
Usage
- Pre-rinse the wheel with water to remove loose dirt and cool the surface.
- Apply Bilt Hamber Auto-Wheel or Korrosol to the wheel and allow the recommended dwell time.
- Use the soft-bristled brush to agitate the face, spokes, barrel and behind the spokes without scratching.
- Rinse the wheel thoroughly with clean water until all chemical and soiling are gone.
- Rinse the brush, shake out excess water and hang to dry with bristles down.
핵심 특징
- 알로이 휠 마감에 안전한 부드러운 합성 모
- 스포크와 내부 배럴 등 좁은 부위까지 도달
- 전체 약 215mm, 헤드 직경 약 20mm
- Auto-Wheel·Korrosol과 함께 사용하도록 설계
사용법
- 물로 휠을 먼저 헹궈 느슨한 오염을 제거하고 표면 온도를 낮춥니다.
- Bilt Hamber Auto-Wheel 또는 Korrosol을 휠에 도포하고 권장 체류 시간을 둡니다.
- 부드러운 모로 휠 면, 스포크, 배럴, 스포크 뒷면까지 스크래치 없이 애지테이션합니다.
- 케미컬과 오염이 모두 사라질 때까지 깨끗한 물로 충분히 헹굽니다.
- 브러시를 헹군 뒤 물기를 털고 모가 아래를 향하도록 걸어 건조합니다.