Finis-Wax
피니스 왁스
Finis-Wax is a paste wax for the final-stage treatment of well-prepared automotive paint. Built around high-grade T1 carnauba, it lays down a hard, detergent-resistant film that produces deep gloss, strong water beading and durable paint protection.
피니스 왁스는 잘 정돈된 자동차 도장의 마지막 단계용 페이스트 왁스입니다. 고등급 T1 카나우바를 중심으로 한 처방으로 단단하고 세제에 강한 막을 형성해 깊은 광택과 우수한 비딩, 지속적인 도장 보호를 제공합니다.
- Brand
- Bilt Hamber
- Categories
- Exterior : Coating
Key features
- High-grade T1 carnauba paste wax
- Hard, durable protective film
- Strong water beading
- Detergent-resistant finish
- No abrasives
- Includes applicator and microfibre
Usage
- Wash, decontaminate (clay or iron remover) and fully dry the paintwork before waxing.
- Work in shade on cool paint so the carnauba-rich wax does not flash off too quickly.
- Apply a thin even layer with a soft foam applicator using straight or circular motions; only a small amount is needed.
- Let the wax haze for about 3 to 5 minutes and check a test area by wiping with a finger.
- Buff away residue with a clean plush short-pile microfibre towel, turning to fresh sides often.
- For deeper gloss and longer protection apply a second thin coat after about 1 to 2 hours.
- Suitable for paint, plastics and trim and can be refreshed every few months.
핵심 특징
- 고등급 T1 카나우바 페이스트 왁스
- 단단하고 내구성 있는 보호 막
- 뛰어난 물방울 비딩
- 세제에 강한 마감
- 연마제 무함유
- 어플리케이터와 극세사 동봉
사용법
- 왁싱 전 도장면을 충분히 세차하고 클레이 또는 철분 제거제로 디컨터미네이션 후 완전히 건조시킵니다.
- 카나우바 함량이 높아 빠르게 마르지 않도록 그늘에서 식은 도장면에서 작업합니다.
- 부드러운 폼 어플리케이터에 소량만 묻혀 직선 또는 원 동작으로 얇고 균일하게 펴 바릅니다.
- 약 3~5분 동안 헤이즈가 형성되도록 두고 손가락으로 테스트해 깨끗이 지워지는지 확인합니다.
- 깨끗하고 두툼한 숏파일 마이크로파이버로 닦아내며 자주 면을 바꿔 사용합니다.
- 광택과 내구성을 높이려면 약 1~2시간 후 두 번째 얇은 층을 추가합니다.
- 도장, 플라스틱, 트림에 안전하며 수 개월에 한 번씩 덧발라 줍니다.