Bilt Hamber 휠 브러시 사용 가이드

Bilt Hamber 휠 브러시 희석비 pH 스펙 카드

Wheel Brush

빌트햄버 휠 브러시는 알로이 휠 표면을 손상시키지 않고 무거운 오염을 풀어내도록 설계된 합성 모 브러시입니다. 전체 길이 약 215mm, 헤드 직경 약 20mm, 모 길이 약 45mm로 1리터 Auto-Wheel 제품에 동봉되며 Auto-Wheel·Korrosol과 함께 사용하기에 적합합니다.

브랜드
Bilt Hamber
카테고리
Tools : Wash Supplies
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-05-17

핵심 특징

사용법

  1. 물로 휠을 먼저 헹궈 느슨한 오염을 제거하고 표면 온도를 낮춥니다.
  2. Bilt Hamber Auto-Wheel 또는 Korrosol을 휠에 도포하고 권장 체류 시간을 둡니다.
  3. 부드러운 모로 휠 면, 스포크, 배럴, 스포크 뒷면까지 스크래치 없이 애지테이션합니다.
  4. 케미컬과 오염이 모두 사라질 때까지 깨끗한 물로 충분히 헹굽니다.
  5. 브러시를 헹군 뒤 물기를 털고 모가 아래를 향하도록 걸어 건조합니다.

The Bilt Hamber Wheel Brush is a soft synthetic-bristle brush designed to agitate heavy contamination on alloy wheels without harming the finish. It measures about 215mm long with a roughly 20mm diameter head and 45mm bristles and is supplied with 1 litre Auto-Wheel; it pairs naturally with Auto-Wheel and Korrosol.

Key features

  • Soft synthetic bristles safe for alloy finishes
  • Reaches inner barrels, spokes and tight areas
  • About 215mm long with around 20mm head
  • Designed to pair with Auto-Wheel and Korrosol

Usage

  1. Pre-rinse the wheel with water to remove loose dirt and cool the surface.
  2. Apply Bilt Hamber Auto-Wheel or Korrosol to the wheel and allow the recommended dwell time.
  3. Use the soft-bristled brush to agitate the face, spokes, barrel and behind the spokes without scratching.
  4. Rinse the wheel thoroughly with clean water until all chemical and soiling are gone.
  5. Rinse the brush, shake out excess water and hang to dry with bristles down.

다른 이름: 빌트햄버, 빌트, 빌트함버, bilt, Bilt Hamber Wheel Brush, Synthetic Wheel Brush, Soft Wheel Brush, Alloy Wheel Brush, Auto-Wheel Brush, 빌트햄버 휠 브러시, 알로이 휠 브러시, 합성모 휠 브러시

View in English

관련 제품

Bilt Hamber의 다른 제품

같은 카테고리(Wash Supplies) 제품

더 보기