Gas-Mac
가스맥
Gas-Mac is a fuel additive for petrol and diesel engines that protects fuel tank interiors above and below the fuel level using vapour-phase migrating corrosion inhibitors. It burns harmlessly through internal combustion engines, helps stabilise fuel during long-term storage and ships as a 500ml aerosol with a lance.
Gas-Mac은 휘발유와 디젤 엔진 모두에 사용하는 연료 첨가제로, 증기상으로 이동하는 부식 억제제가 연료 수위 위아래의 탱크 내부를 보호합니다. 내연기관에서 무해하게 연소되고 장기 저장 시 연료 안정화에도 도움을 주며 500ml 에어로졸과 랜스가 함께 제공됩니다.
- Brand
- Bilt Hamber
- Categories
- Tools : Wash Supplies
Key features
- Protects tank interior above and below fuel level
- Vapour-phase inhibitors reach unwetted metal
- Safe to burn in petrol and diesel engines
- Aids fuel stability during long storage
- Lance included for filler-neck application
Usage
- Make sure the fuel tank or substrate is clean, dry and free of loose rust and contamination.
- Shake the aerosol vigorously for at least about 30 seconds before use.
- Hold the can about 20 to 30 cm from the surface and apply Gas-Mac in light even passes.
- If needed, apply a second coat after the recommended flash-off time for fuller protection.
- Allow the coating to dry fully before returning the tank or component to service.
- Store the aerosol cool and dry away from direct sunlight; invert and purge the nozzle after use.
핵심 특징
- 연료 수위 위아래 탱크 내부 보호
- 증기상 억제제가 미접촉 금속까지 도달
- 휘발유·디젤 엔진에서 무해하게 연소
- 장기 저장 시 연료 안정화 보조
- 연료 주입구 도포용 랜스 포함
사용법
- 연료탱크 또는 도포 대상이 깨끗하고 건조하며 느슨한 녹과 오염이 없는지 확인합니다.
- 사용 전 에어로졸을 최소 약 30초 이상 강하게 흔듭니다.
- 캔을 표면에서 약 20~30cm 떨어진 거리로 유지하며 가볍고 균일하게 분사합니다.
- 필요 시 권장 플래시 오프 시간 후 2차 코트를 도포해 보호력을 보완합니다.
- 탱크나 부품을 사용하기 전에 코팅을 완전히 건조시킵니다.
- 사용 후 노즐을 거꾸로 하여 퍼지하고 직사광선을 피해 서늘하고 건조한 곳에 보관합니다.