Bilt Hamber 가스맥 사용 가이드

Bilt Hamber 가스맥 희석비 pH 스펙 카드

Gas-Mac

Gas-Mac은 휘발유와 디젤 엔진 모두에 사용하는 연료 첨가제로, 증기상으로 이동하는 부식 억제제가 연료 수위 위아래의 탱크 내부를 보호합니다. 내연기관에서 무해하게 연소되고 장기 저장 시 연료 안정화에도 도움을 주며 500ml 에어로졸과 랜스가 함께 제공됩니다.

브랜드
Bilt Hamber
카테고리
Tools : Wash Supplies
구매(한국)
쿠팡에서 보기 — 쿠팡 파트너스 활동의 일환으로 일정 수수료를 제공받을 수 있습니다
최종 업데이트
2026-05-17

핵심 특징

사용법

  1. 연료탱크 또는 도포 대상이 깨끗하고 건조하며 느슨한 녹과 오염이 없는지 확인합니다.
  2. 사용 전 에어로졸을 최소 약 30초 이상 강하게 흔듭니다.
  3. 캔을 표면에서 약 20~30cm 떨어진 거리로 유지하며 가볍고 균일하게 분사합니다.
  4. 필요 시 권장 플래시 오프 시간 후 2차 코트를 도포해 보호력을 보완합니다.
  5. 탱크나 부품을 사용하기 전에 코팅을 완전히 건조시킵니다.
  6. 사용 후 노즐을 거꾸로 하여 퍼지하고 직사광선을 피해 서늘하고 건조한 곳에 보관합니다.

Gas-Mac is a fuel additive for petrol and diesel engines that protects fuel tank interiors above and below the fuel level using vapour-phase migrating corrosion inhibitors. It burns harmlessly through internal combustion engines, helps stabilise fuel during long-term storage and ships as a 500ml aerosol with a lance.

Key features

  • Protects tank interior above and below fuel level
  • Vapour-phase inhibitors reach unwetted metal
  • Safe to burn in petrol and diesel engines
  • Aids fuel stability during long storage
  • Lance included for filler-neck application

Usage

  1. Make sure the fuel tank or substrate is clean, dry and free of loose rust and contamination.
  2. Shake the aerosol vigorously for at least about 30 seconds before use.
  3. Hold the can about 20 to 30 cm from the surface and apply Gas-Mac in light even passes.
  4. If needed, apply a second coat after the recommended flash-off time for fuller protection.
  5. Allow the coating to dry fully before returning the tank or component to service.
  6. Store the aerosol cool and dry away from direct sunlight; invert and purge the nozzle after use.

다른 이름: 빌트햄버, 빌트, 빌트함버, bilt, Bilt Hamber Gas-Mac, Gas Mac, Gas-Mac Fuel Tank Preservative, Fuel Tank Anti-Corrosion Aerosol, Bilt Hamber Fuel Additive, 가스-맥, 연료탱크 방청 에어로졸

View in English

관련 제품

Bilt Hamber의 다른 제품

같은 카테고리(Wash Supplies) 제품

더 보기