Auto-Foam
오토 폼
Auto-Foam is a water-based pre-wash snow foam that wets, penetrates and lifts traffic film and road grime ahead of the contact wash. The biodegradable, non-caustic formula is safe on paint binders and is designed for foam-lance application at about a 1-5% panel impact ratio.
오토폼은 접촉 세차 전에 사용하는 수성 프리워시 스노우폼으로, 주행 오염막과 노면 먼지를 적시고 침투해 들어 올립니다. 생분해성이며 비가성 처방으로 도장 결합제에 안전하고, 폼랜스를 이용해 약 1~5% PIR 범위에서 사용하도록 설계되어 있습니다.
- Brand
- Bilt Hamber
- Categories
- Exterior : Foam, Exterior : Pre-washing (Pretreatment)
- Primary dilution
- 1:20~1:100
- pH
- alkali (13)
Key features
- High-activity pre-wash snow foam
- Water-based and biodegradable
- Non-caustic, safe on paint binders
- Designed for pressure-washer foam lances
- Panel impact ratio about 1-5%
- Loosens traffic film and road grime
Dilution
- Exterior : Foam — 1:20~1:100 (1:20-100) (primary)
Usage
- Fill the foam lance bottle with Auto-Foam diluted so the panel impact ratio sits between about 1:100 for light soiling and 1:20 for heavy soiling.
- Pre-rinse a cool, shaded vehicle with a pressure washer.
- Apply Auto-Foam evenly from bottom to top so the foam clings well to the panels.
- Allow about 1-5 minutes of dwell time and do not let the foam dry on the surface.
- Pressure-rinse thoroughly from top down, then continue with a contact two-bucket wash if needed.
핵심 특징
- 고활성 프리워시 스노우폼
- 수성·생분해성 처방
- 비가성, 도장 결합제에 안전
- 고압세척기 폼랜스용
- PIR 약 1~5%
- 주행 오염막과 노면 먼지 분리
사용법
- 경오염은 약 1:100, 중오염은 약 1:20이 되도록 폼랜스 보틀에 오토폼 희석액을 채웁니다.
- 식어 있는 그늘 상태의 차량을 고압수로 프리린스합니다.
- 폼이 잘 붙도록 아래에서 위 방향으로 차량 전체에 고르게 도포합니다.
- 약 1~5분 정도 체류시키고, 표면에서 마르지 않도록 관리합니다.
- 위에서 아래로 고압수로 충분히 헹군 뒤 필요하면 2버킷 접촉 세차로 이어 갑니다.