Auto Finesse Aqua Coat Dilution Ratios & User Guide

Auto Finesse Aqua Coat dilution ratio and pH specification chart

아쿠아 코트

Auto Finesse Aqua Coat — Exterior : Coating, acid pH. See full specs and usage on the Find Your Detail product page: https://findyourdetail.io/products/auto-finesse/aqua-coat

Auto Finesse 아쿠아 코트 — Exterior : Coating, pH acid. 전체 사양·사용법은 Find Your Detail 제품 페이지에서 확인하세요: https://findyourdetail.io/products/auto-finesse/aqua-coat

Aqua Coat is an SiO2-based ceramic rinse aid that bonds a durable, hydrophobic protective layer to an entire vehicle during the regular wash stage — no buffing or curing required. A light mist applied to a wet surface, followed immediately by a fresh-water rinse, activates and locks in up to three months of water-repelling ceramic protection. It works as a standalone coating or as a top-up boost for existing Caramics ceramic systems.

아쿠아 코트는 SiO2 기반의 세라믹 린스 에이드로, 별도의 버핑이나 경화 과정 없이 일반 세차 단계에서 차량 전체에 내구성 있는 소수성 보호 레이어를 형성합니다. 젖은 표면에 가볍게 스프레이한 후 즉시 깨끗한 물로 헹구면 최대 3개월간 지속되는 물방울 맺힘 세라믹 보호 효과가 활성화됩니다. 단독 코팅으로 사용하거나 기존 카라믹스 세라믹 시스템의 유지 보수용으로도 활용할 수 있습니다.

Brand
Auto Finesse
Categories
Exterior : Coating, Exterior : Drying Aid
Primary dilution
RTU
pH
acid (5)
Where to buy
Amazon (US) — As an Amazon Associate, Find Your Detail earns from qualifying purchases.
Last updated
2026-06-15

Key features

Dilution

UseDilutionRatio
Exterior : Coating (primary)RTU1:0

Usage

  1. Complete a full wash cycle including pre-wash and contact wash with shampoo, then rinse the vehicle thoroughly.
  2. While all surfaces are still wet, lightly mist Aqua Coat over the entire vehicle — a little goes a long way.
  3. Immediately rinse all surfaces again with clean water to activate and bond the SiO2 layer.
  4. Dry the vehicle as normal — the hydrophobic ceramic protection is now locked in.

핵심 특징

  • 세차 단계에서 SiO2 세라믹 보호 적용
  • 최대 3개월의 소수성 내구성
  • 버핑 또는 경화 과정 불필요
  • 물방울 맺힘과 흘러내림 효과 극대화
  • 광택 및 표면 깊이감 향상
  • 도장, 비닐 랩, 휠, 유리, 트림에 안전
  • 단독 사용 또는 카라믹스 유지 보수용으로 호환

사용법

  1. 프리워시와 샴푸를 이용한 컨택 워시를 포함한 전체 세차를 완료한 후 차량을 완전히 헹궈냅니다.
  2. 모든 표면이 젖어 있는 상태에서 아쿠아 코트를 차량 전체에 가볍게 스프레이합니다. 소량으로도 충분합니다.
  3. SiO2 레이어를 활성화하고 결합시키기 위해 즉시 깨끗한 물로 모든 표면을 다시 헹궈냅니다.
  4. 평소처럼 차량을 건조시키면 소수성 세라믹 보호층이 완성됩니다.

Also known as: autofinesse, 오토 피네스, 오토 피너스, Auto Finesse Aqua Coat, AF Aqua Coat, AC, Auto Finesse AC, AF AC, 오토 피네스 아쿠아 코트, 오토 피네스 AC

한국어로 보기

Sources

Related products

More from Auto Finesse

More Coating products

Explore more